Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: B G FRAMING CO., INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of B G FRAMING CO., INC in 3274 NORTHLAKE PARKWAY, TUCKER, GA 30084 (NAICS 238130). OSHA activity number 343909594.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch B G Framing CO., INC — free Get an email when a new federal OSHA severe-injury report for B G Framing CO., INC is published. One employer, no account, unsubscribe in one click.
Site address
3274 NORTHLAKE PARKWAY
City
TUCKER
State
GA
ZIP
30084
Mailing
394 KURTZ ROAD, MARIETTA, GA 30066
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
8
Ownership type
A

5 citations on file for this inspection.

1910.178 L06

Serious Gravity 5 1 instance 8 exposed
Issued
Sep 13, 2019
Abate by
Oct 9, 2019
Penalty
Initial $3,126 · Current $3,126
29 CFR 1910.178(l)(6): The certification did not include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation:  On or about April 5, 2019 at 3274 Northlake Parkway Atlanta, GA 30345, employer exposed employees to hazards associated with employees operating a rough terrain forklift without written or hands on training.  Employees used a JLG SN: 160044079 to lift materials to the upper floors of the structure.
Recent events (1)
  • — Z (S) $3126

1926.20 B02

Serious Gravity 10 1 instance 8 exposed
Issued
Sep 13, 2019
Abate by
Oct 9, 2019
Penalty
Initial $4,376 · Current $4,376
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s):  On or about April 5, 2019 at 3274 Northlake Parkway, Atlanta, GA 30345:  a) Employer did not conduct frequent and regular inspections of the job site to identify and remove hazards such as falls .
Recent events (1)
  • — Z (S) $4376

1926.501 B01

Serious Gravity 10 1 instance 8 exposed
Issued
Sep 13, 2019
Abate by
Oct 9, 2019
Penalty
Initial $4,376 · Current $4,376
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  On or about April 5, 2019 at 3274 Northlake Parkway, Atlanta, GA 30345, employees engaged in lifting materials including, but not limited to engineered lumber beams were not protected from falling to the lower level and exposed to falls from approximately 10'-9" to the lower level.
Recent events (1)
  • — Z (S) $4376

1926.501 B02

Serious Gravity 10 1 instance 8 exposed
Issued
Sep 13, 2019
Abate by
Oct 9, 2019
Penalty
Initial $4,376 · Current $4,376
29 CFR 1926.501(b)(2): Each employee who was constructing a leading edge 6 feet or more above lower levels were not protected from falling by guardrail systems, safety net systems, or personal fall arrest systems:  On or about April 5, 2019 at 3274 Northlake Parkway, Atlanta, GA 30345, employees engaged in leading edge work while installing engineered lumber beams approximately 10'-9" above the lower level were not protected from falling to the lower level.
Recent events (1)
  • — Z (S) $4376

1926.1053 B01

Serious Gravity 5 1 instance 8 exposed
Issued
Sep 13, 2019
Abate by
Oct 9, 2019
Penalty
Initial $3,126 · Current $3,126
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  a) On or about April 5, 2019 at 3274 Northlake Parkway Tucker, GA 30345:  Employees engaged in engineering beam installation work of a commercial structure. The ladder used to access the roof was placed one foot above the roof surface, exposing employees to fall hazards of approximately 10' and 5'' to the dirt below.
Recent events (1)
  • — Z (S) $3126

View B G Framing CO., INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343909594.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.