Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,249Inspections Most recent open 2026-08-20 Last loaded 2026-08-24

OSHA Inspection: USF HOLLAND, LLC

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of USF HOLLAND, LLC in 2700 VALLEY PIKE, DAYTON, OH 45404 (NAICS 484121). OSHA activity number 343968004.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch USF Holland, LLC for free Get an email when a new federal OSHA severe-injury report for USF Holland, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
USF HOLLAND, LLC
Site address
2700 VALLEY PIKE
City
DAYTON
State
OH
ZIP
45404
Mailing
2700 VALLEY PIKE, DAYTON, OH 45404
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Union (A)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
484121
Employees
220
Ownership type
Private (A)

7 citations on file for this inspection.

1910.22 D01

Serious Gravity 10 1 instance 220 exposed
Issued
Aug 9, 2019
Abate by
Sep 26, 2019
Penalty
Initial $13,260 · Current $13,260
29 CFR 1910.22(d)(1): The employer did not ensure that walking-working surfaces were inspected, regularly and as necessary, and maintained in a safe condition:    (a)  On or about April 15, 2019, the employer did not inspect working surfaces, such as the dock plates at doors 41, 32, 23 and 13, to ensure that deficiencies in the surfaces, such as the broken concrete of the dock at the edge of the steel plate or the 2.5 inch gaps between the dock plates and dock plate bumpers at each side of the doorway, would not cause injuries to employees who were crossing these dock plates with fork lifts while loading and unloading freight from trailers as part of their daily job duties.      In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (3)
  • · F (S) $13260
  • · C (S) $13260
  • · Z (S) $13260

1910.22 D02

Deleted Serious Gravity 10 1 instance 220 exposed
Issued
Aug 9, 2019
Abate by
Sep 26, 2019
Penalty
Initial $0 · Current $0
29 CFR 1910.22(d)(2): The employer did not ensure hazardous conditions on walking-working surfaces were corrected or repaired before an employee used the walking-working surface again.  When the correction or repair could not be made immediately, the hazard was not guarded to prevent employees from using the walking-working surface until the hazard was corrected or repaired:  (a)  On or about April 15, 2019, the employer did not prevent employees from using the dock plates at doors 41, 32, 23 and 13, to ensure that deficiencies in the surfaces, such as the broken concrete of the dock at the edge of the steel plate or the 2.5 inch gaps between the dock plates and dock plate bumpers at each side of the doorway, would not cause injuries to employees who were crossing these dock plates with fork lifts while loading and unloading freight from trailers as part of their daily job duties.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (3)
  • · F (S) $0
  • · C (S) $0
  • · Z (S) $0

1910.178 L03 II I

Deleted Serious Gravity 5 1 instance 220 exposed
Issued
Aug 9, 2019
Abate by
Sep 26, 2019
Penalty
Initial $12,503 · Current $0 Reduced
29 CFR 1910.178(l)(3)(ii)(I): Powered industrial truck operators did not receive initial training in other unique or potentially hazardous conditions of the workplace that could affect safe operation:  (a)  Employees who operated forklifts on the dock did not receive site specific training on how to properly approach dock plates and enter trailers to prevent damage to or "chunking out" of the forklift tires by running over the 2.5 inch gaps in the dock plates.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (3)
  • · F (S) $0
  • · C (S) $12503
  • · Z (S) $12503

1904.29 B02

Other-than-serious 1 instance 1 exposed
Issued
Aug 9, 2019
Abate by
Aug 28, 2019
Penalty
Initial $2,085 · Current $6,332
29 CFR 1904.29(b)(2): The employer did not fill out or correctly fill out an OSHA Form 301 or equivalent for each recordable injury or illness.    On or about May 1, 2019, at USF Holland, LLC, Dayton, OH, an OSHA Form 301 or equivalent for the following work-related injuries or illnesses was not filled out completely or correctly for the calendar year 2019.    (a)  On or about April 15, 2019, an employee was hospitalized when they suffered chest wall contusions and chest pain from a powered industrial vehicle accident on a broken dock plate.  The employer did not complete the Safety Risk Online Injury Report (equivalent form to OSHA 301) with details of the hospitalization and information about the physician or other healthcare professional.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (3)
  • · F (O) $6332
  • · C (O) $2085
  • · Z (O) $2085

1904.39 A02

Other-than-serious 1 instance 220 exposed
Issued
Aug 9, 2019
Penalty
Initial $10,419 · Current $0 Reduced
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye.    (a)  On or about April 15, 2019, an employee was injured when the forklift they were driving hit a broken dock plate when entering a trailer to pick up freight.  The employee was hospitalized for these injuries on April 15 and released on April 18, 2019, but the employer did not report the hospitalization to OSHA as required.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (3)
  • · F (O) $0
  • · C (O) $10419
  • · Z (O) $10419

1904.40 A

Deleted Other-than-serious 1 instance 220 exposed
Issued
Aug 9, 2019
Penalty
Initial $2,085 · Current $0 Reduced
29 CFR 1904.40(a): The employer did not provide an authorized government representative the records within the four business hours.  (a)  On or about May 1, 2018, at USF Holland in Dayton, OH, the employer did not provide the 2018 OSHA 300 Log to the OSHA representative within four hours of the request for copies.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (3)
  • · F (O) $0
  • · C (O) $2085
  • · Z (O) $2085

1910.178 P01

Other-than-serious 1 instance 220 exposed
Issued
Aug 9, 2019
Abate by
Aug 28, 2019
Penalty
Initial $1,169 · Current $1,169
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s:)    (a)  Forklifts, such as #67067, on the dock were not taken out of service as recommended by the maintenance contractor when tires were "chunked out."    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET)
Recent events (3)
  • · F (O) $1169
  • · C (O) $1169
  • · Z (O) $1169

View USF Holland, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 343968004.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.