Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: R & R CONSTRUCTION SERVICES, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of R & R CONSTRUCTION SERVICES, INC. in 1971 BERKSHIRE PL, WHEATON, IL 60189 (NAICS 238160). OSHA activity number 343981809.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch R & R Construction Services, INC. — free Get an email when a new federal OSHA severe-injury report for R & R Construction Services, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1971 BERKSHIRE PL
City
WHEATON
State
IL
ZIP
60189
Mailing
1736 N ROSE ST, APT #2C, PALATINE, IL 60074
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
5
Ownership type
A

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 2 exposed
Issued
Aug 8, 2019
Abate by
Sep 27, 2019
Penalty
Initial $319 · Current $319
29 CFR 1903.19(c)(1):  The employer failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     R & R Construction Services, Inc., failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Citation Number                     Item Number                           Abatement Date      1                                                    2                                            07/01/2019     1                                                    3                                            06/10/2019     In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (O) $319

1926.501 B13

Serious Gravity 10 1 instance 5 exposed
Issued
May 10, 2019
Penalty
Initial $3,978 · Current $3,978
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure.   On or about May 4, 2019, employees working on a residential roof up to approximately 19 feet above grade while engaged in roofing operations were exposed to fall hazards.  Employees were not utilizing fall protection.   No abatement certification or documentation required for this item.
Recent events (1)
  • — Z (S) $3978

1926.503 A01

Serious Gravity 5 1 instance 5 exposed
Issued
May 10, 2019
Abate by
Jul 1, 2019
Penalty
Initial $2,842 · Current $2,842
29 CFR 1926.503(a)(1): The employer shall provide a training program for each employee who might be exposed to fall hazards. The program shall enable each employee to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards.  On or about May 4, 2019, employees engaged in roofing operations up to approximately 19 feet above grade were exposed to fall hazards.  The employees had not received training to recognize and minimize the fall hazards on the jobsite.   Abatement certification is required for this item in accordance with 29 CFR 1903(c).
Recent events (1)
  • — Z (S) $2842

1926.1053 B01

Serious Gravity 5 1 instance 4 exposed
Issued
May 10, 2019
Abate by
Jun 10, 2019
Penalty
Initial $2,842 · Current $2,842
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.  On or about May 4, 2019, employees using an extension ladder to access/egress the roof were exposed to fall hazards.  The ladder did not extend three (3) feet above the landing surface.   Abatement certification is required for this item in accordance with 29 CFR 1903(c).
Recent events (1)
  • — Z (S) $2842

View R & R Construction Services, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 343981809.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.