Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DYNAMIC EXTERIORS 10, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DYNAMIC EXTERIORS 10, INC. in 4170 GROVE AVE., GURNEE, IL 60031 (NAICS 238160). OSHA activity number 344033535.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Dynamic Exteriors 10, INC. — free Get an email when a new federal OSHA severe-injury report for Dynamic Exteriors 10, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4170 GROVE AVE.
City
GURNEE
State
IL
ZIP
60031
Mailing
660 BONNIE LANE, ELK GROVE VILLAGE, IL 60007
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
10
Ownership type
A

7 citations on file for this inspection.

1926.100 A

Serious Gravity 5 1 instance 1 exposed
Issued
Sep 17, 2019
Abate by
Sep 23, 2019
Penalty
Initial $3,334 · Current $1,248 Reduced
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:             a) On or about May 23, 2019, employees were exposed to head injury while working without protective helmets in areas below roofing operations.            In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $1248
  • — Z (S) $3334

1926.501 B03

Serious Gravity 10 6 instances 10 exposed
Issued
Sep 17, 2019
Abate by
Sep 23, 2019
Penalty
Initial $5,834 · Current $3,142 Reduced
29 CFR 1926.501(b)(3): Each employee in a hoist area was not protected from falling 6 feet (1.8m) or more to lower levels by guardrail systems or personal fall arrest systems:          a) On or about May 23, 2019, employees were exposed to the hazard of falling approximately 15 feet while hoisting materials and equipment at the edge of the roof deck without fall protection.          In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $3142
  • — Z (S) $5834

1926.502 F01

Serious Gravity 10 1 instance 10 exposed
Issued
Sep 17, 2019
Penalty
Initial $5,834 · Current $3,150 Reduced
29 CFR 1926.502(f)(1): Warning lines were not erected around all sides of the roof work area:       a) On or about May 23, 2019, warning lines were not erected around all sides of the roof work area.       No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (S) $3150
  • — Z (S) $5834

1926.502 F01 III

Serious Gravity 10 3 instances 10 exposed
Issued
Sep 17, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.502(f)(1)(iii): Points of access, material handling areas, storage areas, and/or hoisting areas were not connected to the work area by an access path formed by two warning lines:     a) On or about May 23, 2019, warning lines were not used to create access paths connecting the work area to the point of access, material handling areas, and hoisting areas, along the roof edge.   No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.502 F02 II

Serious Gravity 10 4 instances 10 exposed
Issued
Sep 17, 2019
Penalty
Initial $0 · Current $0
29 CFR 1926.502(f)(2)(ii): Warning line systems were not rigged and supported in such a way that its lowest point (including sag) was not less than 34 inches from the walking/working surface:       a) On or about May 23, 2019, warning lines along the roof edge were not rigged and supported to prevent sagging below 34 inches.    No abatement certification or documentation required for this violation.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.416 A01

Repeat Gravity 10 1 instance 10 exposed
Issued
Sep 17, 2019
Abate by
Sep 23, 2019
Penalty
Initial $11,669 · Current $6,415 Reduced
29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means:          a) On or about May 23, 2019, employees were exposed to electrical hazards where roofing work was conducted adjacent to an energized electrical service drop power line.    Dynamic Exteriors 10, Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.416 (a)(1) which was contained in OSHA inspection number 1351728, citation 1, item 2, and was affirmed as a final order on March 21, 2019, with respect to a worksite located at 561 Estes Ave., Schaumburg, Illinois.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (R) $6415
  • — Z (R) $11669

1926.501 B10

Repeat Gravity 10 10 instances 10 exposed
Issued
Sep 17, 2019
Abate by
Sep 23, 2019
Penalty
Initial $29,172 · Current $16,045 Reduced
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system.  Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system;     a) On or about May 23, 2019, employees were exposed to the hazard of falling approximately 15 feet while performing roofing work without the use of fall protection or a safety monitor.         Dynamic Exteriors 10, Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501 (b)(10) which was contained in OSHA inspection number 979947, citation 1, item 1, and was affirmed as a final order on October 21, 2014, with respect to a worksite located at 923 West Randolph, Chicago, Illinois.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (R) $16045
  • — Z (R) $29172

View Dynamic Exteriors 10, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344033535.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.