WILSON, AR —
OSHA Inspection: GILSTER-MARY LEE CORPORATION
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of GILSTER-MARY LEE CORPORATION in 5755 SOUTH US HIGHWAY 61, WILSON, AR 72395 (NAICS 424420). OSHA activity number 344416128.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GILSTER-MARY LEE CORPORATION
- Site address
- 5755 SOUTH US HIGHWAY 61
- City
- WILSON
- State
- AR
- ZIP
- 72395
- Mailing
- 5755 SOUTH US HIGHWAY 61, WILSON, AR 72395
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424420
- Employees
- 173
- Ownership type
- A
Citations
9 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 27, 2020
- Penalty
- Initial $13,494 · Current $0 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: On or about October 29, 2019, in the Pie Room by the Shipping Area, the employer did not ensure that an employee wore a seat belt when operating a Hyster #404 forklift. The employee was exposed to a crushing hazard.
Recent events (3)
- — F (S) $0
- — C (S) $13494
- — Z (S) $13494
1910.178 P01
- Issued
- Apr 27, 2020
- Abate by
- Dec 17, 2021
- Penalty
- Initial $13,494 · Current $6,747 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s) On or about October 29, 2019 in the Pie Room by the Shipping area, an employee operated a Hyster #404 forklift with a defective safety belt, exposing the employee to a crushing hazard.
Recent events (3)
- — F (O) $6747
- — C (S) $13494
- — Z (S) $13494
1910.178 Q07
- Issued
- Apr 27, 2020
- Abate by
- Dec 17, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: On or about October 29, 2019 in the Pie Room by the Shipping area, an employee was operated a Hyster #404 forklift with a defective safety belt that was not inspected, exposing the employee to a crushing hazard.
Recent events (3)
- — F (O) $0
- — C (S) $0
- — Z (S) $0
1910.147 C04 I
- Issued
- Apr 27, 2020
- Penalty
- Initial $13,494 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: On or about October 29, 2019 and times prior thereto, an employee disassembled the Auger on Line #17 in the Pie Room without utilizing a lockout tagout procedure. The employer failed to ensure lockout tagout was utilized.
Recent events (3)
- — F (S) $0
- — C (S) $13494
- — Z (S) $13494
1910.212 A01
- Issued
- Apr 27, 2020
- Abate by
- Jan 4, 2022
- Penalty
- Initial $13,494 · Current $10,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about October 29, 2019 and times prior thereto, employees were required to open the screen on the hopper on Line #17 in the Pie Room when it was in operation, exposing employees to the hazard of being caught-in the auger in the machine.
Recent events (3)
- — F (S) $10000
- — C (S) $13494
- — Z (S) $13494
1910.303 B01
- Issued
- Apr 27, 2020
- Penalty
- Initial $9,639 · Current $0 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees: On or about October 29, 2019 in the Pie Room, employees working in the Packaging section of Pie Shell Line #17 were exposed to over 100 volts electrical hazard from a broken outlet.
Recent events (3)
- — F (S) $0
- — C (S) $9639
- — Z (S) $9639
1910.303 F02
- Issued
- Apr 27, 2020
- Abate by
- Dec 27, 2021
- Penalty
- Initial $11,566 · Current $5,783 Reduced
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: On or about October 29, 2019, the employer did not label the electrical cabinets and disconnects for equipment in the Pie Room, which included but not limited to Pie Shell Line #17. This condition exposed maintenance technicians to about 480 volts electrical hazards during equipment repair.
Recent events (3)
- — F (S) $5783
- — C (S) $11566
- — Z (S) $11566
1910.305 B01 I
- Issued
- Apr 27, 2020
- Penalty
- Initial $9,639 · Current $4,819 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(i): Conductors entering cutout boxes, cabinets, or fittings were not protected from abrasion, and openings through which conductors entered were not effectively closed: On or about October 29, 2019 and times prior, the employer did not protect conductors and/or wires entering the motor underneath Line #17 hopper from abrasion, exposing employees to electrical hazards.
Recent events (3)
- — F (S) $4819
- — C (S) $9639
- — Z (S) $9639
1910.305 G01 IV A
- Issued
- Apr 27, 2020
- Abate by
- Jun 2, 2020
- Penalty
- Initial $11,566 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: On or about October 29, 2019 on Line #17 in the Pie Room, the employer used flexible cords for more than 90 days in the place of fixed wiring.
Recent events (3)
- — F (S) $0
- — C (S) $11566
- — Z (S) $11566
More inspections at Gilster-Mary LEE Corporation
View Gilster-Mary LEE Corporation's full OSHA safety record →
More inspections in this industry (NAICS 424420)
More inspections in AR
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344416128.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.