Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LSC COMMUNICATIONS

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of LSC COMMUNICATIONS in 850 WEST PARK ROAD, UNION, MO 63084 (NAICS 339940). OSHA activity number 344481825.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch LSC Communications — free Get an email when a new federal OSHA severe-injury report for LSC Communications is published. One employer, no account, unsubscribe in one click.
Establishment
LSC COMMUNICATIONS
Site address
850 WEST PARK ROAD
City
UNION
State
MO
ZIP
63084
Mailing
850 WEST PARK ROAD, UNION, MO 63084
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
339940
Employees
200
Ownership type
A

3 citations on file for this inspection.

1910.147 C04 I

Deleted Serious Gravity 10 6 instances 8 exposed
Issued
Mar 30, 2020
Abate by
Apr 23, 2020
Penalty
Initial $13,494 · Current $0 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    On or about November 15, 2019, at the jobsite located at 850 West Park Road, Union, Missouri, the employer did not ensure procedures for the control of hazardous energy sources were developed, documented and used where equipment operators were required, to lockout equipment in the file imprint system.  Employees were exposed to amputation hazards where they were instructed to use the stop safe button prior to reaching into the machine/point of operation.  The conditions existed where employee(s) operated the following machines with file print systems:  a/  Kempsmith File Folder with Autopack; Location: F65; Model Number: FA300, Serial Number 134.  b/  Kempsmith File Folder with Autopack; Location: F67   c/ Kempsmith File Folder with Autopack; Location: F73  d/ Kempsmith File Folder with Autopack; Location: F115  e/ Kempsmith File Folder; Location: F117  f/  Kempsmith File Folder; Location: F118
Recent events (2)
  • — I (S) $0
  • — Z (S) $13494

1910.147 C07 I A

Deleted Serious Gravity 10 6 instances 8 exposed
Issued
Mar 30, 2020
Abate by
Apr 23, 2020
Penalty
Initial $13,494 · Current $0 Reduced
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation   On or about November 15, 2019, at the jobsite located at 850 West Park Road, Union, Missouri, the employer did not ensure employee(s) were trained in in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation.  Operators who were required to perform service or maintenance were exposed to hazardous energy while cleaning, clearing jams and/or making adjustments to the following machines:  a/  Kempsmith File Folder with Autopack; Location: F65; Model Number: FA300, Serial Number 134.  b/  Kempsmith File Folder with Autopack; Location: F67   c/ Kempsmith File Folder with Autopack; Location: F73  d/ Kempsmith File Folder with Autopack; Location: F115  e/ Kempsmith File Folder; Location: F117  f/  Kempsmith File Folder; Location: F118
Recent events (2)
  • — I (S) $0
  • — Z (S) $13494

1910.212 A03 II

Serious Gravity 10 6 instances 8 exposed
Issued
Mar 30, 2020
Abate by
Apr 23, 2020
Penalty
Initial $13,494 · Current $13,494
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s):  On or about November 15, 2019, at the jobsite located at 850 West Park Road, Union, Missouri, the employer failed to provide guards at the point of operation where the imprint rollers make contact with the paper. The conditions existed where employee(s) operated the following machine(s):    a/  Kempsmith File Folder with Autopack; Location: F65; Model Number: FA300, Serial Number 134.  b/  Kempsmith File Folder with Autopack; Location: F67   c/ Kempsmith File Folder with Autopack; Location: F73  d/ Kempsmith File Folder with Autopack; Location: F115  e/ Kempsmith File Folder; Location: F117  f/  Kempsmith File Folder; Location: F118
Recent events (2)
  • — I (S) $13494
  • — Z (S) $13494

View LSC Communications's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344481825.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.