OSHA Inspection: THE PRESIDIO TRUST

Issued

Mar 18, 2020

Abate by

Apr 13, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.29(b)(2)(i): Mid-rails were not installed at a height midway between the top edge of the guiderail system and the walking-working surface:  Building 1351: The mezzanine storage area guard rail system was missing the mid-rails. Employees were exposed to approximately 9 feet fall.

Issued

Mar 18, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.110(b)(6)(i): Containers, and first stage regulating equipment when used, were not located outside of buildings:  Building 1241, General Maintenance Building: Five LPG (Propane) containers were stored inside the building.

Issued

Mar 18, 2020

Abate by

Apr 13, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):    In the following locations, employees were operating forklifts without proper training or having been evaluated. Employees who work in the area were exposed to struck-by hazards.  a) Facility Warehouse  b) Building 1355

Issued

Mar 18, 2020

Abate by

Apr 13, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  Building 1355, Mechanic Shop: A BOICE CRANE (serial No. 6652115) pedestal drill press was not provided with safety guard to protect employees from flying chips and sparks.

Issued

Mar 18, 2020

Abate by

Apr 13, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving:  In the following locations, machines were not anchored to the floor to prevent moving or tipping over. Employees were exposed to crushing injuries.  a) Building 1355, Mechanic Shop: Pedestal drill press (BOICE CRANE serial number 6652115)   b) Water treatment Plant: DeWalt (DW758) pedestal grinder

Issued

Mar 18, 2020

Abate by

Apr 13, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:  In the following locations, the work rests on grinders were not adjusted to 1/8th of an inch. Employees were exposed to bench point hazards.  a) Locksmith Shop: A Baldor bench grinder's hand rest was 1/2 an inch away from the grinding wheel  b) Water Treatment Plant: A DEWALT pedestal grinder's hand rest was 3/8th of an inch away from the grinding wheel

Issued

Mar 18, 2020

Abate by

Apr 13, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:  Building 1241, General Maintenance Building: An orange extension cord was used to energize a 14 inch Porter Cable metal saw model 1410 in lieu of fixed wiring. Employees were exposed to electrical hazards.

Issued

Mar 18, 2020

Abate by

Apr 13, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch:  Carpenter Shop: The ALYCO pedestal grinder tongue was 1 5/16 of an inch away from the left side grinding wheel.

Issued

Mar 18, 2020

Abate by

Apr 13, 2020

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. :  Carpenter Shop: The compressed air used for cleaning was not reduced to 30 p.s.i.