Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CP INDUSTRIES

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of CP INDUSTRIES in 2214 WALNUT STREET, MCKEESPORT, PA 15132 (NAICS 332313). OSHA activity number 344663497.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch CP Industries — free Get an email when a new federal OSHA severe-injury report for CP Industries is published. One employer, no account, unsubscribe in one click.
Establishment
CP INDUSTRIES
Site address
2214 WALNUT STREET
City
MCKEESPORT
State
PA
ZIP
15132
Mailing
2214 WALNUT STREET, MCKEESPORT, PA 15132
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332313
Employees
70
Ownership type
A

8 citations on file for this inspection.

1910.28 B01 I A

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 3, 2020
Penalty
Initial $6,747 · Current $4,385 Reduced
29 CFR 1910.28(b)(1)(i)(A): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level was protected from falling by a standard guardrail system.    a)  Hot Draw Building, Burn Access Platform, on or about February 28, 2020 - The employer did not ensure that the working platform adjacent to the spin forge was protected with a standard guardrail system.  The unprotected side of the platform was 54 inches high.
Recent events (2)
  • — I (S) $4385
  • — Z (S) $6747

1910.28 B06 I

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 3, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.28(b)(6)(i): Employees less than 4 feet (1.2 m) above uncovered or unguarded dangerous equipment were not protected from falling into or onto the dangerous equipment by a guardrail system or a travel restraint system:  a)  Hot Draw Building, Burn Access Platform, on or about February 28, 2020 - The employer did not ensure that the working platform adjacent to the spin forge was protected with a standard guardrail system on the side of the spin forge.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.25 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Aug 3, 2020
Abate by
Sep 3, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.25(b)(1): (1) Handrails, stair rail systems, and guardrail systems are provided in accordance with 29 CFR 1910.28:  a)  Hot Draw Building, Burn Access Platform, on or about February 28, 2020 - The employer did not ensure that the stair access to the burn access platform was equipped with handrails.  The stair access had 5 risers.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.151 C

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 3, 2020
Penalty
Initial $5,398 · Current $3,500 Reduced
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:    a)  Paint Room Storage Area, on or about February 28, 2020 - An eyewash station was not provided in the area where a corrosive paint, Epoxy-Polyamide was stored, handled and mixed.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $5398

1910.1026 L02 II

Other-than-serious 1 instance 2 exposed
Issued
Aug 3, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1026(l)(2)(ii): The employer did not make a copy of the Chromium (VI) standard, 29 CFR 1910.1026, readily available to all employees who were exposed to chromium (VI):  a)  In the Facility, on or about February 28, 2020 - The employer did not make a copy of the Chromium Standard available to employees who were exposed to chromium during welding operations on stainless steel.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 F06

Other-than-serious 2 instances 3 exposed
Issued
Aug 3, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein:  a)  Hot Draw Building, on or about February 28, 2020 - The heat treat tanks and quench tanks which contain a mixture of Parquench 90 and water were not labeled, tagged or marked with the identity of the hazardous chemical and the hazards associated with this material.  b)  D & E Building 60 and 61, on or about February 28, 2020 - The heat treat tanks and quench tanks which contain a mixture of Parquench 90 and water were not labeled, tagged or marked with the identity of the hazardous chemical and the hazards associated with this material.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.147 C04 I

Other-than-serious 1 instance 9 exposed
Issued
Aug 3, 2020
Abate by
Feb 1, 2021
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:    a)  In the Facility, on or about February 28, 2020 - The employer did not develop and document procedures for the control of potentially hazardous energy.  Employees at the facility work on and lockout hazardous energy on equipment including but not limited to furnaces.
Recent events (3)
  • — P (O) $0
  • — I (O) $0
  • — Z (O) $0

1910.147 C06 I

Other-than-serious 1 instance 9 exposed
Issued
Aug 3, 2020
Abate by
Sep 30, 2020
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed:      a)  In the Facility, on or about February 28, 2020 - The employer did not conduct a periodic inspection of the facility's energy control procedures at least annually to ensure the procedures of the standard were being followed.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View CP Industries's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344663497.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.