APPLETON, WI —
OSHA Inspection: R. SABEE COMPANY LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of R. SABEE COMPANY LLC in 1718 W 8TH STREET, APPLETON, WI 54914 (NAICS 322291). OSHA activity number 344790191.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- R. SABEE COMPANY LLC
- Site address
- 1718 W 8TH STREET
- City
- APPLETON
- State
- WI
- ZIP
- 54914
- Mailing
- 1718 W. 8TH STREET, APPLETON, WI 54914
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 322291
- Employees
- 160
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.132 D01
- Issued
- Dec 3, 2020
- Penalty
- Initial $8,111 · Current $4,867 Reduced
General-duty citation text
29 CFR 1910.132(d)(1): The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): On or about June 15, 2020 the employer had not sufficiently detailed a hazard assessment and documentation for maintenance technician employees performing electrical testing and/or troubleshooting activities to determine electric shock and/or arc flash hazards those employees were potentially exposed to.
Recent events (3)
- — F (S) $4867
- — C (S) $8111
- — Z (S) $8111
1910.335 A01 I
- Issued
- Dec 3, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.335(a)(1)(i): Employees working in areas where there are potential electrical hazards shall be provided with, and shall use, electrical protective equipment that is appropriate for the specific parts of the body to be protected and for the work to be performed. Note: Personal protective equipment requirements are contained in subpart I of this part. On or about June 15, 2020 the employer did not ensure that maintenance technician employees were provided with the proper electrical protective equipment when performing electrical testing on overhead electrical components to protect eyes, face, hands and/or other portions of the body.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.332 B01
- Issued
- Dec 3, 2020
- Penalty
- Initial $8,111 · Current $0 Reduced
General-duty citation text
29 CFR 1910.332(b)(1): Practices addressed in this standard. Employees shall be trained in and familiar with the safety-related work practices required by 1910.331 through 1910.335 that pertain to their respective job assignments. On or about June 15, 2020 the employer did not ensure that employees exposed to live conductors when performing work such as, but not limited to, troubleshooting and voltage testing were trained on procedures for working safely on energized circuits and the proper use of personal protective equipment.
Recent events (3)
- — F (S) $0
- — C (S) $8111
- — Z (S) $8111
1910.333 A
- Issued
- Dec 3, 2020
- Penalty
- Initial $8,111 · Current $0 Reduced
General-duty citation text
29 CFR 1910.333(a): Safety-related work practices shall be employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work is performed near or on equipment or circuits which are or may be energized. The specific safety-related work practices shall be consistent with the nature and extent of the associated electrical hazards: On or about June 15, 2020, the employer did not ensure that employees exposed to live conductors when performing work such as, but not limited to, troubleshooting and voltage testing utilized safety-related work practices to prevent electric shock or other injuries including the use of personal protective equipment.
Recent events (3)
- — F (S) $0
- — C (S) $8111
- — Z (S) $8111
1910.333 C02
- Issued
- Dec 3, 2020
- Penalty
- Initial $0 · Current $4,867
General-duty citation text
29 CFR 1910.333(c)(2): "Work on energized equipment." Only qualified persons may work on electric circuit parts or equipment that have not been deenergized under the procedures of paragraph (b) of this section. Such persons shall be capable of working safely on energized circuits and shall be familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools. On or about June 15, 2020, the employer did not ensure that employees exposed to live conductors when performing work such as, but not limited to, troubleshooting and voltage testing were only qualified person(s) and were familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding materials and insulated tools.
Recent events (3)
- — F (S) $4867
- — C (S) $0
- — Z (S) $0
1910.303 G01 I
- Issued
- Dec 3, 2020
- Abate by
- Dec 17, 2020
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i): Working space for equipment likely to require examination, adjustment, servicing, or maintenance while energized shall comply with the following dimensions, except as required or permitted elsewhere in this subpart: On or about June 15, 2020 the three electrical disconnect switches in the welding cell were blocked by a welding gas cylinder and welding carts and were not kept clear for immediate access.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at R. Sabee Company LLC
View R. Sabee Company LLC's full OSHA safety record →
More inspections in this industry (NAICS 322291)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344790191.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.