Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ARROW FASTENER CO., LLC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of ARROW FASTENER CO., LLC. in 271 MAYHILL STREET, SADDLE BROOK, NJ 07663 (NAICS 339993). OSHA activity number 344972310.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Arrow Fastener CO., LLC. — free Get an email when a new federal OSHA severe-injury report for Arrow Fastener CO., LLC. is published. One employer, no account, unsubscribe in one click.
Site address
271 MAYHILL STREET
City
SADDLE BROOK
State
NJ
ZIP
07663
Mailing
271 MAYHILL STREET, SADDLE BROOK, NJ 07663
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
339993
Employees
100
Ownership type
A

3 citations on file for this inspection.

1910.145 F03

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Mar 5, 2021
Abate by
Mar 31, 2021
Penalty
Initial $4,096 · Current $0 Reduced
29 CFR 1910.145(f)(3): Tags were not used as a means to prevent accidental injury or illness to employees who were exposed to hazardous or potentially hazardous conditions, equipment or operations which were out of the ordinary, unexpected or not readily:  a) At the facility, 271 Mayhill Street Saddle brook, NJ - Out packer Machine N3: Tags/stickers were not used as a means to prevent accidental injury to employees who were exposed to hazards or potentially hazardous conditions, resulting in an injury, on or about 10/5/20.  CSHO did not observed tags/stickers on the machine on the date of the inspection. Inspection was conducted on 10/6/20.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4096

1910.147 C01

Serious Gravity 5 1 instance 1 exposed
Issued
Mar 5, 2021
Abate by
Mar 31, 2021
Penalty
Initial $5,461 · Current $3,300 Reduced
29 CFR  1910.147(c)(1): The employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative:  a) At the facility, 271 Mayhill Street Saddle brook, NJ - Out packer Machine N3: Employer did not establish a program consisting of, employee training and periodic inspections to ensure that before any employee performed servicing or maintenance on a   autopacker N3 machine, where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine was isolated from the energy source and rendered inoperative, on or about 10/5/20.  Inspection was conducted on 10/6/20.
Recent events (2)
  • — I (S) $3300
  • — Z (S) $5461

1910.147 C04 I

Serious Gravity 10 1 instance 1 exposed
Issued
Mar 5, 2021
Abate by
Mar 31, 2021
Penalty
Initial $9,557 · Current $6,700 Reduced
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) At the facility, 271 Mayhill Street Saddle brook, NJ - Out packer Machine N3 Staples N lines: Energy control procedures were not utilized for the control of potentially hazardous energy while an employee was engaged in reinstalling the pulley for the conveyor belt, on or about  10/5/20.  Inspection was conducted on 10/6/20
Recent events (2)
  • — I (S) $6700
  • — Z (S) $9557

View Arrow Fastener CO., LLC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 344972310.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.