FORNEY, TX —
OSHA Inspection: JUAN FLORES
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JUAN FLORES in 841 CARMEN STREET, FORNEY, TX 75126 (NAICS 238130). OSHA activity number 345010490.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JUAN FLORES
- Site address
- 841 CARMEN STREET
- City
- FORNEY
- State
- TX
- ZIP
- 75126
- Mailing
- 7219 MARINGO DRIVE, DALLAS, TX 75227
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.100 A
- Issued
- Nov 19, 2020
- Abate by
- Dec 16, 2020
- Penalty
- Initial $3,470 · Current $2,100 Reduced
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: (a) This violation occurred on or about November 2, 2020, at the job-site located at 841 Carmen Street, Forney, TX; where employees were decking a new residential single family house and were exposed to head injuries where overhead hazard exists by not wearing hard hats.
Recent events (2)
- — I (S) $2100
- — Z (S) $3470
1926.102 A01
- Issued
- Nov 19, 2020
- Abate by
- Dec 16, 2020
- Penalty
- Initial $3,470 · Current $0 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Employees were not provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents: (a) This violation occurred on or about November 2, 2020, at the job-site located at 841 Carmen Street, Forney, TX; where employees were doing decking work while using a Makita circular saw, model number 5007F, serial number 2064353 to cut plywood. Employees were not wearing safety glasses and were exposed to eye injuries.
Recent events (2)
- — I (S) $0
- — Z (S) $3470
1926.501 B13
- Issued
- Nov 19, 2020
- Abate by
- Dec 16, 2020
- Penalty
- Initial $4,048 · Current $2,400 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net systems, personal fall arrest systems, or an alternative fall protection measure under another provision of paragraph 1926.501(b), nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502: (a) This violation occurred on or about November 2, 2020, at the job-site located at 841 Carmen Street, Forney, TX; where employees doing decking work were exposed to fall hazards.
Recent events (2)
- — I (S) $2400
- — Z (S) $4048
1926.1053 B01
- Issued
- Nov 19, 2020
- Abate by
- Dec 16, 2020
- Penalty
- Initial $4,048 · Current $0 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access: (a) This violation occurred on or about November 2, 2020, at the job-site located at 841 Carmen Street, Forney, TX; where employees doing decking work on a new build single family home and were using 16 feet extension ladder, model number W-2328-16 that did not extend 3-feeet above the landing of the roof. Employees were exposed to a fall hazard.
Recent events (2)
- — I (S) $0
- — Z (S) $4048
More inspections at Juan Flores
View Juan Flores's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345010490.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.