DALLAS, TX —
OSHA Inspection: JUAN CRUZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JUAN CRUZ in 5626 CHARLESTOWN DR, DALLAS, TX 75230 (NAICS 238140). OSHA activity number 345048425.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JUAN CRUZ
- Site address
- 5626 CHARLESTOWN DR
- City
- DALLAS
- State
- TX
- ZIP
- 75230
- Mailing
- 416 S CHARLES, LEWISVILLE, TX 75057
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 5
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.451 B01 I
- Issued
- Jan 8, 2021
- Abate by
- Feb 4, 2021
- Penalty
- Initial $4,048 · Current $4,048
General-duty citation text
29 CFR 1926.451(b)(1)(i):Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) shall be installed so that the space between adjacent units and the space between the platform and the uprights is no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary (for example, to fit around uprights when side brackets are used to extend the width of the platform). On December 3, 2020. Employees were exposed to a fall hazard of approximately 11 feet in height when working on a scaffold with missing planks.
Recent events (1)
- — Z (S) $4048
1926.451 E01
- Issued
- Jan 8, 2021
- Abate by
- Feb 4, 2021
- Penalty
- Initial $4,048 · Current $4,048
General-duty citation text
29 CFR 1926.451(e)(1):When scaffold platforms are more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from another scaffold, structure, personnel hoist, or similar surface shall be used. Crossbraces shall not be used as a means of access. On December 3, 2020. Employees were exposed to a fall hazard of approximately 11 feet in height when working on a scaffold and using side panels as means of access and egress.
Recent events (1)
- — Z (S) $4048
1926.451 G01
- Issued
- Jan 8, 2021
- Abate by
- Feb 4, 2021
- Penalty
- Initial $4,048 · Current $4,048
General-duty citation text
29 CFR 1926.451(g)(1):Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1)(i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold. Paragraph (g)(2) of this section addresses fall protection for scaffold erectors and dismantlers. On December 3, 2020. Employees were exposed to a fall hazard of approximately 11 feet in height when working on a scaffold without guard rails on the open ends.
Recent events (1)
- — Z (S) $4048
More inspections at Juan Cruz
View Juan Cruz's full OSHA safety record →
More inspections in this industry (NAICS 238140)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345048425.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.