MADILL, OK —
OSHA Inspection: CONTRACT MANUFACTURER, L.L.C.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CONTRACT MANUFACTURER, L.L.C. in 200 COUNTRY ROAD, MADILL, OK 73446 (NAICS 336212). OSHA activity number 345224505.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONTRACT MANUFACTURER, L.L.C.
- Site address
- 200 COUNTRY ROAD
- City
- MADILL
- State
- OK
- ZIP
- 73446
- Mailing
- 103 TITAN ROAD, KINGSTON, OK 73439
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 336212
- Employees
- 151
- Ownership type
- A
Citations
13 citations on file for this inspection.
1910.37 B02
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $8,582 · Current $5,400 Reduced
General-duty citation text
29 CFR 1910.37(b)(2):Each exit was not clearly visible and marked by a sign reading "Exit": The employer does not ensure each exit was marked with a sign reading EXIT to identify location of egress in the event of an emergency. This violation was observed on or about March 22, 2021, in the paint touch-up booth at the facility, exposing employees to the hazard of smoke inhalation and burn. Pursuant to 29 CFR 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation describing the steps taken to ensure exits are marked with signs that read, "EXIT".
Recent events (2)
- — I (O) $5400
- — Z (S) $8582
1910.101 B
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $10,728 · Current $6,800 Reduced
General-duty citation text
29 CFR 1910.101(b):The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6: The employer does not ensure that stored, compressed gas cylinders were stored in accordance with Compressed Gas Association Pamphlet P-1-1965, exposing employees to fire, explosion, and struck by hazards. a) This violation was observed on or about March 22, 2021, where cylinder of spray adhesive in shipping department not secured b) This violation was observed on or about March 22, 2021, where multiple empty and full cylinders of acetylene, dimethyl ether, methyl acetate behind the facility were missing protective caps and not secured Pursuant to 29 CFR 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation describing the steps taken to ensure compressed gas cylinders are stored in accordance to Compressed Gas Association Pamphlet P-1-1965.
Recent events (2)
- — I (O) $6800
- — Z (S) $10728
1910.107 C04
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.107(c)(4):Electrical wiring and equipment did not conform to the provisions of this paragraph and were not otherwise in accordance with subpart S of this part: The employer does not ensure an electrical box was provided with a cover. This violation was observed on or about March 22, 2021, at the facility, exposing employees to fire and explosion hazards. Pursuant to 29 CFR 1903.19, within (10) calendar days of the date of this citation, the employer must submit documentation describing the steps that is taking to ensure all electrical equipment in spray booths are in accordance with Subpart S.
Recent events (2)
- — I (S) $0
- — Z (S) $13653
1910.107 E02
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $0 · Current $8,500
General-duty citation text
29 CFR 1910.107(e)(2): The quantity of flammable or combustible liquids kept in the vicinity of spraying operations were not at a minimum required for operations or they exceeded a supply for one day or one shift: The employer does not ensure that chemicals in spray booths are maintained as a day's use. This violation was observed on or about March 22, 2021, at the facility, exposing employees to fire and explosion hazards. Pursuant to 29 CFR 1903.19, within (10) calendar days of the date of this citation, the employer must submit documentation describing the steps that is taking to ensure only a days/shifts use of chemicals are allowed in spray booths
Recent events (2)
- — I (O) $8500
- — Z (S) $0
1910.107 G02
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(g)(2): Scrapers, spuds, or other such tools used for cleaning purposes were not of nonsparking material: The employer does not ensure that tools used to clean spray booths were constructed from non-spark producing material. This violation was observed on or about March 22, 2021, at the facility, exposing employees to fire and explosion hazards. Pursuant to 29 CFR 1903.19, within (10) calendar days of the date of this citation, the employer must submit documentation describing the steps that is taking to ensure non-spark producing material is used when cleaning the spray booths.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.133 A01
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $12,873 · Current $6,500 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: The employer did not ensure employees used the appropriate eye protection for protection while welding, at the CM Trailers facility, exposing the employees to the hazard of flash burns and inflammation of the cornea: a) This violation was observed on or about March 22, 2021, where an employee working on welding line# 3 without a welding hood or welding rated eye protection b) This violation was observed on or about March 22, 2021, where an employee working on the welding table without a welding hood or welding rated eye protection Pursuant to 29 CFR 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation describing the steps taken to ensure the use of the appropriate eye or face protection.
Recent events (2)
- — I (O) $6500
- — Z (S) $12873
1910.184 D
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $12,873 · Current $0 Reduced
General-duty citation text
29 CFR 1910.184(d): Each day before being used, slings and all fastenings and attachments were not inspected for damage or defects by a competent person designated by the employer: The employer does not ensure steel alloy slings are inspected. This violation was observed on or about March 22, 2021, at the CM Trailers facility along the monorail system, exposing employees to the hazard of falling loads. Pursuant to 29 CFR 1903.19, within (10) calendar days of the date of this citation, the employer must submit documentation describing the steps that is taking to ensure slings are inspected prior to each use.
Recent events (2)
- — I (S) $0
- — Z (S) $12873
1910.184 E01
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $0 · Current $8,100
General-duty citation text
29 CFR 1910.184(e)(1): Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach: The employer does not ensure slings have permanently affixed durable identification tags. This violation was observed on or about March 22, 2021, at the facility, exposing employees to the hazard of falling loads. Pursuant to 29 CFR 1903.19, within (10) calendar days of the date of this citation, the employer must submit documentation describing the steps that is taking to identification tags stating size, grade, rated capacity, and reach are affixed to all slings.
Recent events (2)
- — I (O) $8100
- — Z (S) $0
1910.212 A01
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $13,653 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: The employer does not ensure all equipment used at the facility is provided with proper machine guarding, exposing employees to the hazard of amputation hazards. a) This violation was observed on or about March 22, 2021, where a Standard 200 ton hydraulic press brake with the light curtains elevated above / away from the point of operation.. b) This violation was observed on or about March 22, 2021, where a Betenbender 10' x 160 ton hydraulic press brake light curtains attached to machine but was not operational. Pursuant to 29 CFR 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation describing the steps taken to ensure machine guarding is provided to protect operator(s) and other employees from hazard(s) created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.
Recent events (2)
- — I (S) $0
- — Z (S) $13653
1910.252 B02 III
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $8,582 · Current $0 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: The employer does not ensure workers and other persons adjacent to the welding area were protected from the rays. This violation was observed on or about March 22, 2021, at the CM Trailers facility, exposing adjacent employees to the hazard of flash burns. Pursuant to 29 CFR 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation describing the steps that is taking to ensure workers and other persons adjacent welding areas are protected from the rays.
Recent events (2)
- — I (S) $0
- — Z (S) $8582
1910.254 D09 III
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $8,582 · Current $0 Reduced
General-duty citation text
29 CFR 1910.254(d)(9)(iii): Cables with damaged insulation or exposed bare conductors were not replaced: The employer does not ensure welding cables with exposed copper wires were repaired or removed from service, at the CM Trailers facility: a) This violation was observed on or about August 3, 2021, in the robot cell, two welding cables had exposed copper wires, exposing employees to burns and shock hazards b) This violation was observed on or about August 3, 2021, on welding line#2, a welding cable damaged exposing copper wires, exposing employees to burns and shock hazards Pursuant to 29 CFR 1903.19, within (10) calendar days of the date of this citation, the employer must submit documentation describing the steps taken to ensure welders with exposed copper wires are repaired or removed from service.
Recent events (2)
- — I (S) $0
- — Z (S) $8582
1910.305 G01 IV B
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $8,582 · Current $5,400 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B):Flexible cords and cables may not be used where run through holes in walls, ceilings or floors: The employer does not ensure flexible cords are not ran through holes in structure walls, at the CM Trailers facility: b) This violation was observed on or about August 3, 2021, where a flexible cord to a floor fan was ran through a hole in the wall and plugged onto an outlet in an adjacent room, exposing employees to shock hazards Pursuant to 29 CFR 1903.19, within (10) calendar days of the date of this citation, the employer must submit documentation describing the steps taken to ensure flexible cords are not ran through holes in structure walls.
Recent events (2)
- — I (O) $5400
- — Z (S) $8582
1910.1200 F06
- Issued
- Sep 14, 2021
- Abate by
- Oct 1, 2021
- Penalty
- Initial $8,582 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.1200(f)(6): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity and appropriate hazard warnings regarding the chemicals contained therein: The employer does not ensure that a tank used at the facility is properly labeled or marked to indicate the tanks contents and hazards: a) This violation was observed on or about March 22, 2021, where small spray bottles containing unknown chemicals were not labeled, exposing employees to irritation of the eyes, respiratory system and skin hazards b) This violation was observed on or about March 22, 2021, where 55 gallon barrels of hydraulic fluid were not labeled, exposing employees to irritation of the eyes, respiratory system and skin hazards c) This violation was observed on or about March 22, 2021, where large 55 gallon containers of Rinse prep were not labeled, exposing employees to irritation of the eyes, respiratory system and skin hazards Pursuant to 29 CFR 1903.19, within ten (10) calendar days of the date of this citation, the employer must submit documentation describing the steps taken to ensure the fuel tank is properly marked and labeled.
Recent events (2)
- — I (O) $4000
- — Z (S) $8582
More inspections at Contract Manufacturer, L.L.C.
View Contract Manufacturer, L.L.C.'s full OSHA safety record →
More inspections in this industry (NAICS 336212)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345224505.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.