KYKOTSMOVI VILLAGE, AZ —
OSHA Inspection: BUREAU OF INDIAN EDUCATION
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BUREAU OF INDIAN EDUCATION in KYKOSMOVI VILLAGE, KYKOTSMOVI VILLAGE, AZ 86039 (NAICS 921190). OSHA activity number 345474555.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BUREAU OF INDIAN EDUCATION
- Site address
- KYKOSMOVI VILLAGE
- City
- KYKOTSMOVI VILLAGE
- State
- AZ
- ZIP
- 86039
- Mailing
- P.O. BOX 229, KYKOTSMOVI VILLAGE, AZ 86039
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 921190
- Employees
- 22
- Ownership type
- D
Citations
7 citations on file for this inspection.
1910.28 B13 II
- Issued
- Oct 19, 2021
- Abate by
- Oct 29, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.28(b)(13)(ii): The employer did not ensure that when work is performed at least 6 feet (1.6 m) but less than 15 feet (4.6 m) from the roof edge, each employee is protected from falling by using a guardrail system, safety net system, travel restraint system, or personal fall arrest system. The employer may use a designated area when performing work that is both infrequent and temporary. a) MAIN BUILDING: The employer did not ensure that employees were protected from fall hazards while performing HVAC maintenance by using either a guardrail system, safety net system, travel restraint system, personal fall arrest system, or designated area.
Recent events (1)
- — Z (S) $0
1910.212 A03 II
- Issued
- Oct 19, 2021
- Abate by
- Oct 27, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(3)(ii):The point of operation of machines whose operation exposed an employee to injury, was not guarded: a) HOUSE 13: Employees were exposed to caught-in hazards while using an unguarded Delta table saw, model 62-044, S/N 96G95173 .
Recent events (1)
- — Z (S) $0
1910.212 B
- Issued
- Oct 19, 2021
- Abate by
- Oct 25, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b):Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) MAINTENANCE SHOP: Employees were exposed to caught-in hazards while using a grinding wheel of a bench grinder, model 605 GS, S/N C4603160, which was not securely anchored to prevent walking or moving during operation.
Recent events (1)
- — Z (S) $0
1910.215 A02
- Issued
- Oct 19, 2021
- Abate by
- Oct 26, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: a) MAINTENANCE SHOP: Employees were exposed to caught-in hazards while using a grinding wheel of a bench grinder, model 605 GS, S/N C4603160, with an improperly mounted spindle guard.
Recent events (1)
- — Z (S) $0
1910.215 A04
- Issued
- Oct 19, 2021
- Abate by
- Oct 25, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(a)(4):Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) MAINTENANCE SHOP: Employees were exposed to caught-in hazards while using a grinding wheel of a bench grinder, model 605 GS, S/N C4603160, with the work rest adjusted to one and one-sixteenth inch from the grinding wheel.
Recent events (1)
- — Z (S) $0
1910.215 B09
- Issued
- Oct 19, 2021
- Abate by
- Oct 25, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9):The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) MAINTENANCE SHOP: Employees were exposed to caught-in hazards while using a grinding wheel of a bench grinder, model 605 GS, S/N C4603160, with the tongue guard adjusted to seven-eighths inch from the grinding wheel.
Recent events (1)
- — Z (S) $0
1910.305 B02 I
- Issued
- Oct 19, 2021
- Abate by
- Oct 25, 2021
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i):Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: a) MAINTENANCE STORAGE ROOM: Employees were exposed to electrical hazards where the faceplate of a two gang outlet box was missing components and exposed live wires.
Recent events (1)
- — Z (O) $0
More inspections at Bureau of Indian Education
View Bureau of Indian Education's full OSHA safety record →
More inspections in this industry (NAICS 921190)
More inspections in AZ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345474555.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.