Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: WEABER, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of WEABER, INC. in 11117 SKYLINE DRIVE, TITUSVILLE, PA 16354 (NAICS 321912). OSHA activity number 345568802.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Weaber, INC. — free Get an email when a new federal OSHA severe-injury report for Weaber, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
WEABER, INC.
Site address
11117 SKYLINE DRIVE
City
TITUSVILLE
State
PA
ZIP
16354
Mailing
11117 SKYLINE DRIVE, TITUSVILLE, PA 16354
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
321912
Employees
69
Ownership type
A

4 citations on file for this inspection.

1910.147 C04 II

Serious Gravity 1 1 instance 5 exposed
Issued
Feb 9, 2022
Abate by
Mar 1, 2022
Penalty
Initial $5,283 · Current $3,698 Reduced
29 CFR  1910.147(c)(4)(ii):The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items of this section.  A) Weaber, Inc. on or about September 27, 2021 in the machine shop: The lockout/tagout procedure for machine molder 97 did not address specific techniques for bleeding off the compressed air from the machine.  Employees perform servicing and maintenance operations that include but are not limited to blade changes and removing jams.
Recent events (2)
  • — I (S) $3698.1
  • — Z (S) $5283

1910.147 D02

Serious Gravity 5 1 instance 5 exposed
Issued
Feb 9, 2022
Abate by
Mar 1, 2022
Penalty
Initial $10,566 · Current $7,396 Reduced
29 CFR  1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment:  A) Weaber Inc. on or about September 27, 2021 in the machine shop: An employee suffered multiple finger amputations injuries when reaching into the molding machine 97. The employee reached into the machine before the molding heads came to a complete stop. The machine was not properly locked out prior to employees performing servicing and maintenance including, but not limited to clearing jams.
Recent events (2)
  • — I (S) $7396.2
  • — Z (S) $10566

1910.147 D04 I

Serious Gravity 5 1 instance 5 exposed
Issued
Feb 9, 2022
Abate by
Mar 1, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.147(d)(4)(i):Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:   A) Weaber Inc. on or about September 27, 2021 in the machine shop: An employee that was performing servicing and maintenance including but not limited to clear jams did not affix a lockout device to isolate the electrical or air energy sources associated with molder 97.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.147 D05 I

Serious Gravity 5 1 instance 5 exposed
Issued
Feb 9, 2022
Abate by
Mar 1, 2022
Penalty
Initial $0 · Current $0
29 CFR  1910.147(d)(5)(i):All potentially hazardous stored or residual energy was not relieved, disconnected, restrained or otherwise rendered safe after the application of lockout or tagout devices to energy isolating devices:  A) Weaber Inc. on or about September 27, 2021 in the machine shop: An employee did not release stored energy associated with the air of molder machine 97. An employee shut down the power to the machine, but did not bleed off the air associated with the machine before conducting servicing and maintenance activities.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Weaber, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345568802.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.