OMAHA, NE —
OSHA Inspection: STONE CONCEPTS INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of STONE CONCEPTS INC. in 10802 SAPP BROTHERS DR., OMAHA, NE 68138 (NAICS 337110). OSHA activity number 345957047.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- STONE CONCEPTS INC.
- Site address
- 10802 SAPP BROTHERS DR.
- City
- OMAHA
- State
- NE
- ZIP
- 68138
- Mailing
- 10802 SAPP BROTHERS DR., OMAHA, NE 68138
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 25
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 15, 2022
- Abate by
- Oct 12, 2022
- Penalty
- Initial $4,144 · Current $4,144
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer is failing furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees: The employer is failing to ensure employees engaged in countertop production at Stone Concepts located at 10802 Sapp Brothers Drive, Omaha, Nebraska were not exposed to struck by hazards where employees were operating powered industrial trucks while not wearing seatbelt restraints. AMONG OTHER METHODS, ONE FEASIBLE AND ACCEPTABLE ABATEMENT METHOD TO CORRECT THIS HAZARD IS: (a) Ensure that employees operating a forklift are utilizing a seat belt as required by ASME B56.1-1993. (b) Develop and implement a disciplinary action program and procedures as means of ensuring employees follow safety protocols such as wearing a seat belt while operating these vehicles. (c) Review the company's current forklift training program to ensure it addresses the struck-by, roll over and caught between hazards related to operating a forklift and apply recommended safety measures to ensure safe operation of the vehicle.
Recent events (1)
- — Z (S) $4144
1910.147 C04
- Issued
- Sep 15, 2022
- Abate by
- Oct 12, 2022
- Penalty
- Initial $3,315 · Current $3,315
General-duty citation text
29 CFR 1910.147(c)(4): Procedures were not developed, documented, and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: The employer is failing to ensure employees engaged in countertop production at Stone Concepts located at 10802 Sapp Brothers Drive, Omaha, Nebraska were not exposed to struck by hazards when performing maintenance and inspections of countertop cutting machinery by developing lock out tag out procedures for each machine.
Recent events (1)
- — Z (S) $3315
1910.178 L01 II
- Issued
- Sep 15, 2022
- Abate by
- Nov 2, 2022
- Penalty
- Initial $3,315 · Current $3,315
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a power industrial truck: The employer is failing to provide powered industrial truck training to employees engaged in countertop production at Stone Concepts located at 10802 Sapp Brothers Drive, Omaha, Nebraska. Employees were exposed to struck by hazards while operating and working near powered industrial trucks.
Recent events (1)
- — Z (S) $3315
1910.178 Q07
- Issued
- Sep 15, 2022
- Abate by
- Oct 12, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily: The employer is failing to ensure employees engaged in countertop production at Stone Concepts located at 10802 Sapp Brothers Drive, Omaha, Nebraska were not exposed to struck by hazards while operating powered industrial trucks due to inspections for defects and damage not being performed, at least daily, before they were put in service not being performed.
Recent events (1)
- — Z (O) $0
More inspections at Stone Concepts INC.
View Stone Concepts INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 345957047.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.