WASHINGTON, PA —
OSHA Inspection: ADVANCED COIL INDUSTRY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ADVANCED COIL INDUSTRY in 175 PLUMPTON AVENUE, WASHINGTON, PA 15301 (NAICS 333519). OSHA activity number 346085723.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ADVANCED COIL INDUSTRY
- Site address
- 175 PLUMPTON AVENUE
- City
- WASHINGTON
- State
- PA
- ZIP
- 15301
- Mailing
- 175 PLUMPTON AVENUE, WASHINGTON, PA 15301
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333519
- Employees
- 8
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 13, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Facility- 175 Plumpton Avenue, Washington, PA: On or about July 19, 2022, the employer failed to develop an energy control procedures for equipment that employees are required to conduct service and maintenance activities on such as but not limited to the "Wide Face Finishing Machine".
Recent events (1)
- — Z (S) $0
1910.147 C07 I
- Issued
- Sep 13, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i):The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: (a) Facility- 175 Plumpton Avenue, Washington, PA: On or about July 19, 2022, the employer did not provide training to employees conducting maintenance and servicing activities that required equipment to be locked and tagged out.
Recent events (1)
- — Z (S) $0
1910.147 D04 I
- Issued
- Sep 13, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i):Lockout or tagout devices were not affixed to each energy isolating device by authorized employees:(a) (a) Facility- 175 Plumpton Avenue, Washington, PA: On or about July 19, 2022, employees were servicing the "Wide Face Finishing Machine" and did not isolate all energy sources by locking and/or tagging out each energy source.
Recent events (1)
- — Z (S) $0
1910.178 L01 I
- Issued
- Sep 13, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(i):The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) Facility- 175 Plumpton Avenue, Washington, PA: On or about July 19, 2022, all employees that operate a powered industrial truck did not receive the appropriate training, evaluation, and certification of their powered industrial truck.
Recent events (1)
- — Z (S) $0
1910.179 J03
- Issued
- Sep 13, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(3):Complete inspections of the crane was not being performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section: (a) Facility- 175 Plumpton Avenue, Washington, PA: On or about July 19, 2022, the employer failed to complete annual crane inspections on the TRAMBEAM 20 ton crane.
Recent events (1)
- — Z (S) $0
1910.179 J02 III
- Issued
- Sep 13, 2022
- Abate by
- Sep 30, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(j)(2)(iii):Monthly inspections of hooks, with signed reports, were not performed: (a) Facility- 175 Plumpton Avenue, Washington, PA: On or about July 19, 2022, monthly inspections of hooks were not performed with a signed report of the inspection.
Recent events (1)
- — Z (S) $0
1910.28 B01 I
- Issued
- Sep 13, 2022
- Abate by
- Oct 7, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.28(b)(1)(i):29 CFR 1910.28(b)(1)(i): Except as provided elsewhere in this section 29 CFR 1910.28, the employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level is protected from falling by one or more of the systems described in 29 CFR 1910.28(b)(1)(i): (a) Facility- 175 Plumpton Avenue, Washington, PA: On or about July 19, 2022, employees were exposed to fall hazards at the loading dock area.
Recent events (1)
- — Z (O) $0
More inspections at Advanced Coil Industry
View Advanced Coil Industry's full OSHA safety record →
More inspections in this industry (NAICS 333519)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346085723.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.