OSHA Inspection: JZ CUSTOM FRAMING LLC

Issued

May 5, 2023

Abate by

Jun 23, 2023

Penalty

Initial $376 · Current $376

General-duty citation text

29 CFR  1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.   a. On or about September 13, 2022, at the above addresses jobsite, the employees conducting residential carpentry operations were not provided training on how to minimize fall hazards, thereby exposing employees to the hazards associated with falls.  Citation Number          Item Number           Abatement Date              01                                  001                              02/24/2023              01                                  003b                           02/24/2023

Issued

Jan 6, 2023

Abate by

Feb 24, 2023

Penalty

Initial $2,486 · Current $2,486

General-duty citation text

29 CFR  1910.178(l): Operators were not trained in the safe operation of powered industrial trucks:  a. On or about September 13, 2022, at the above addressed jobsite, an employee required to operate powered industrial vehicle had not been trained, thereby exposing employee to vehicle tip-over, struck-by, and crushed-by hazards.

Issued

Jan 6, 2023

Penalty

Initial $3,108 · Current $3,108

General-duty citation text

29 CFR  1926.102(a)(1):The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.  a. On or about September 13, 2022, at the above addressed jobsite, employees using pneumatic nail guns were not wearing safety glasses, thereby exposing employees to hazards associated with eye injuries.

Issued

Jan 6, 2023

Penalty

Initial $4,351 · Current $4,351

General-duty citation text

29 CFR  1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a. On or about September 13, 2022, at the above addressed jobsite,  employees performing residential carpentry operations, twenty (20) feet eight (8) inches above the ground, were not protected from falls, thereby exposing the employees to fall hazards.

Issued

Jan 6, 2023

Abate by

Feb 24, 2023

Penalty

Initial $0 · Current $0

General-duty citation text

29 CFR  1926.503(a)(1):The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a. On or about September 13, 2022, at the above addresses jobsite, the employees conducting residential carpentry operations were not provided training on how to minimize fall hazards, thereby exposing employees to the hazards associated with falls.