OAK PARK, IL —
OSHA Inspection: OAK ROOFING, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of OAK ROOFING, INC. in 227 SOUTH BLVD., OAK PARK, IL 60302 (NAICS 238160). OSHA activity number 346238694.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- OAK ROOFING, INC.
- Site address
- 227 SOUTH BLVD.
- City
- OAK PARK
- State
- IL
- ZIP
- 60302
- Mailing
- 220 HEMLOCK, WOOD DALE, IL 60191
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 4
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.1200 E01
- Issued
- Nov 23, 2022
- Abate by
- Dec 28, 2022
- Penalty
- Initial $4,144 · Current $0 Reduced
General-duty citation text
29 CFR 1926.59: The requirements applicable to construction work under this section are identical to those set forth at 29 CFR 1910.1200 of this chapter. 29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which described how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) would be met: a) On September 20, 2022, Oak Roofing, Inc., did not develop or implement a written hazard communication program in accordance with 29 CFR 1910.1200(e)(1) that would describe or include at least the following: 1) Requirement for labeling and other forms of warning; 2) Safety data sheet availability; 3) Employee information and training; 4) A list of hazardous chemicals known to be present in the workplace; 5) Methods to inform employees of the hazards on non-routine tasks; and 6) Methods to provide other employer(s) access to safety data sheet; information on any precautionary measures and the labeling system used in the workplace. Employee(s) were exposed to hazardous chemicals including but not limited to crystalline silica. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $4144
1926.1153 C01
- Issued
- Nov 23, 2022
- Penalty
- Initial $4,144 · Current $2,900 Reduced
General-duty citation text
29 CFR 1926.1153(c)(1): For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the tasks in Table 1, unless the employer assessed and limited the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section. a) On September 20, 2022, Oak Roofing, Inc., did not implement engineering controls and work practices, as specified in Table 1 of 1926.1153 when an employee was cutting bricks containing silica with a handheld portable saw. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $2900
- — Z (S) $4144
1926.1153 D02 I
- Issued
- Nov 23, 2022
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: a) On September 20, 2022, Oak Roofing, Inc.., did not assess the exposure of an employee cutting brick containing crystalline silica. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 G01
- Issued
- Nov 23, 2022
- Abate by
- Jan 12, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan: a) On September 20, 2022, Oak Roofing, Inc., did not establish and implement a written silica exposure control plan that complied with the requirements of 1926.1153(g)(1)(i) through (iv) when an employee was cutting brick containing crystalline silica with a handheld gas-powered Stihl saw. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 G04
- Issued
- Nov 23, 2022
- Abate by
- Jan 9, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(g)(4):The employer did not designate a competent person to make frequent and regular inspections of job sites, materials, and equipment to implement the written exposure control plan: a) On September 20, 2022, Oak Roofing, Inc., did not designate a competent person to make frequent and regular inspection of the job site, materials, and equipment to implement a written exposure plan for silica at a jobsite located at 227 South Blvd., Oak Park, IL 60302. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.1153 I02 II
- Issued
- Nov 23, 2022
- Abate by
- Jan 9, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1153(i)(2)(ii):The employer did not make a copy of this section readily available without cost to each employee covered by this section: a) On September 20, 2022, Oak Roofing, Inc., did not make a copy of the 1926.1153 standard available to each employee on the job site located at 227 South Blvd., Oak Park, IL 60302. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at OAK Roofing, INC.
View OAK Roofing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346238694.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.