MILFORD, CT —
OSHA Inspection: SHOW MOTION, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SHOW MOTION, INC. in 1034 BRIDGEPORT AVENUE, MILFORD, CT 06460 (NAICS 337110). OSHA activity number 346415151.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SHOW MOTION, INC.
- Site address
- 1034 BRIDGEPORT AVENUE
- City
- MILFORD
- State
- CT
- ZIP
- 06460
- Mailing
- 1034 BRIDGEPORT AVENUE, MILFORD, CT 06460
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 75
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.213 C01
- Issued
- Jun 1, 2023
- Abate by
- Aug 1, 2023
- Penalty
- Initial $10,938 · Current $10,938
General-duty citation text
29 CFR 1910.213(c)(1):Each circular hand-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut: WORKSHOP: On/or about December 27, 2022, the following table saws used for ripping were not equipped with an adjustable guard and/or hood. An employee operating an unguarded Delta Unisaw table saw with plywood resulted in the partial amputation of two fingers. 1) Delta Unisaw, serial number 87C08040. 2) Oliver, serial number 60204 3) Delta Unisaw
Recent events (2)
- — I (S) $10938
- — Z (S) $10938
1910.213 C02
- Issued
- Jun 1, 2023
- Abate by
- Aug 1, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Each hand-fed circular ripsaw was not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: WORKSHOP: On/or about December 27, 2022, the following table saws used for ripping were not equipped with a spreader to prevent the material from being thrown back on the operator. An employee operating an unguarded Delta Unisaw table saw with plywood sustained partial amputations of two fingers. 1) Delta Unisaw, serial number 87C08040. 2) Oliver, serial number 60204 3) Delta Unisaw
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Jun 1, 2023
- Abate by
- Aug 1, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Each hand-fed circular ripsaw was not provided with non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: WORKSHOP: On/or about December 27, 2022, the following table saw used for ripping was not equipped with non-kickback fingers or dogs to prevent throw back of material toward the operator. An employee operating an unguarded Delta Unisaw table saw with plywood sustained partial amputations of two fingers. 1) Delta Unisaw, serial number 87C08040. 2) Oliver, serial number 60204 3) Delta Unisaw
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1030 C01 I
- Issued
- Jun 1, 2023
- Abate by
- Aug 1, 2023
- Penalty
- Initial $7,813 · Current $3,910 Reduced
General-duty citation text
29 CFR 1910.1030(c)(1)(i): The employer having employee(s) with occupational exposure did not establish a written Exposure Control Plan designed to eliminate or minimize employee exposure: WORKSHOP: On or about December 27, 2022, an employee cleaned blood from a table saw after another employee sustained partial amputation of two fingers. The employer had not developed and implemented a bloodborne pathogen exposure control plan with clean-up procedures to protect employees from blood and other potentially infectious materials.
Recent events (2)
- — I (S) $3910
- — Z (S) $7813
1910.1030 G02
- Issued
- Jun 1, 2023
- Abate by
- Aug 1, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1030(g)(2): The employer did not train each employee with occupational exposure in accordance with the requirements of this section. WORKSHOP: On or about December 27, 2022, an employee cleaned blood from a table saw after another employee sustained partial amputation of two fingers. The employer had not provided bloodborne pathogen training and information to all the employees performing clean up procedures from blood and other potentially infectious materials at the Delta Unisaw table saw.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1904.39 A02
- Issued
- Jun 1, 2023
- Penalty
- Initial $7,813 · Current $0 Reduced
General-duty citation text
29 CFR 1904.39(a)(2):The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours. ESTABLISHMENT: The employer had not reported to OSHA within 24 hours that an employee sustained partial amputation of two fingers while operating an unguarded Delta Unisaw table saw.
Recent events (2)
- — I (O) $0
- — Z (O) $7813
More inspections at Show Motion, INC.
View Show Motion, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346415151.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.