Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SLP CONSTRUCTION LLC

Unprogrammed Other inspection · Safety discipline

On , OSHA opened an unprogrammed Other safety inspection of SLP CONSTRUCTION LLC in 925 COUNTRY CLUB PARKWAY, MAUMELLE, AR 72113 (NAICS 238140). OSHA activity number 346420045.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch SLP Construction LLC — free Get an email when a new federal OSHA severe-injury report for SLP Construction LLC is published. One employer, no account, unsubscribe in one click.
Site address
925 COUNTRY CLUB PARKWAY
City
MAUMELLE
State
AR
ZIP
72113
Mailing
11 MOUNTAIN AIR LOOP DR, CONWAY, AR 72032
Inspection type
Unprogrammed Other (I)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238140
Employees
4
Ownership type
A

9 citations on file for this inspection.

1903.19 C01

Other-than-serious 5 instances 4 exposed
Issued
Nov 3, 2023
Abate by
Dec 8, 2023
Penalty
Initial $376 · Current $376
29 CFR 1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  a) On or about October 16, 2023, the employer failed to submit certification of corrective action for citation 1, item 1-a issued on July 6, 2023, with an abatement due date of July 31, 2023. b) On or about October 16, 2023, the employer failed to submit certification of corrective action for citation 1, item 1-b issued on July 6, 2023, with an abatement due date of July 31, 2023. c) On or about October 16, 2023, the employer failed to submit certification of corrective action for citation 1, item 1-c issued on July 6, 2023, with an abatement due date of July 31, 2023. d) On or about October 16, 2023, the employer failed to submit certification of corrective action for citation 1, item 1-d issued on July 6, 2023, with an abatement due date of July 31, 2023. e) On or about October 16, 2023, the employer failed to submit certification of corrective action for citation 1, item 3 issued on July 6, 2023, with an abatement due date of July 24, 2023.
Recent events (1)
  • — Z (O) $376

1903.19 D01

Other-than-serious 5 instances 4 exposed
Issued
Nov 3, 2023
Abate by
Dec 8, 2023
Penalty
Initial $376 · Current $376
29 CFR 1903.19(d)(1):  The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required:   a) On or about October 16, 2023, the employer failed to submit documentation of corrective action for citation 1, item 1-c issued on July 6, 2023, with an abatement due date of July 31, 2023. b) On or about October 16, 2023, the employer failed to submit documentation of corrective action for citation 1, item 1-d issued on July 6, 2023, with an abatement due date of July 31, 2023. c) On or about October 16, 2023, the employer failed to submit documentation of corrective action for citation 1, item 3 issued on July 6, 2023, with an abatement due date of July 24, 2023.
Recent events (1)
  • — Z (O) $376

1926.451 B01 I

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 5, 2023
Abate by
Jul 31, 2023
Penalty
Initial $3,349 · Current $3,349
29 CFR  1926.451(b)(1)(i):  Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) was not installed so that the space between adjacent units and the space between the platform and the uprights were no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary:  a) On or about January 5, 2023, on the first level of a scaffold, employees performing masonry activities such as but not limited to cutting brick, and installing brick fa�ade where a broken scaffold plank created a space greater than 1-inch between adjacent planks.
Recent events (1)
  • — Z (S) $3349

1926.451 B05 I

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 5, 2023
Abate by
Jul 31, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.451(b)(5)(i):  The end of a platform 10 feet or less in length extended over its support more than 12 inches and the platform was not designed and installed so that the cantilevered portion of the platform is able to support employees and/or materials without tipping, or has guardrails which block employee access to the cantilevered end:   a) On or about January 5, 2023, on the first level of a scaffold, employees performing masonry activities such as but not limited to cutting brick, and installing brick fa�ade where scaffold planks extended beyond their support more than 12-inches.
Recent events (1)
  • — Z (S) $0

1926.451 B06

Serious Gravity 10 2 instances 4 exposed
Issued
Jul 5, 2023
Abate by
Jul 31, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.451(b)(6): On scaffolds where scaffold planks were abutted to create a long platform, each abutted end did not rest on a separate support surface:   a)On or about January 5, 2023, on the second level at the southeast corner, employees performing masonry activities such as but not limited to cutting brick, and installing brick fa�ade were working on a scaffold where planks were not supported on each end by the scaffolding frame.  b) On or about January 5, 2023, at the southeast corner, employees performing masonry activities such as but not limited to cutting brick, and installing brick fa�ade were working on a scaffold from side-bracket platforms planks that were not supported on each end by the scaffolding frame.
Recent events (1)
  • — Z (S) $0

1926.451 B08

Serious Gravity 10 2 instances 4 exposed
Issued
Jul 5, 2023
Abate by
Jul 31, 2023
Penalty
Initial $0 · Current $0
29 CFR  1926.451(b)(8): At all points of a scaffold where the platform changes direction, such as turning a corner, the platform that rests on a bearer at an angle other than a right angle was not laid first, and platforms which rest at right angles over the same bearer shall be laid second, on top of the first platform:  a)On or about January 5, 2023, on a scaffold in the southeast corner of the first level, employees were performing masonry activities such as but not limited to cutting brick, and installing brick fa�ade where the platform was not supported by the end frames.   b)On or about January 5, 2023, on a scaffold in the southeast corner of the second level, employees were performing masonry activities such as but not limited to cutting brick, and installing brick fa�ade where the platform was not supported by the end frames.
Recent events (1)
  • — Z (S) $0

1926.451 E01

Serious Gravity 10 1 instance 4 exposed
Issued
Jul 5, 2023
Penalty
Initial $4,688 · Current $4,688
29 CFR  1926.451(e)(1):  When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface was not used.  Crossbraces were used as a means of access:  a) On or about January 5, 2023, on a scaffold, employees performing masonry activities such as but not limited to cutting brick, and installing brick fa�ade were using the crossbraces of the scaffold as a means of access from the scaffold platform.
Recent events (1)
  • — Z (S) $4688

1926.451 G01

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 5, 2023
Abate by
Jul 24, 2023
Penalty
Initial $3,349 · Current $3,349
29 CFR  1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section:   a) On or about January 5, 2023, at the southeast corner on the second level of a scaffold, employees performing masonry activities such as but not limited to cutting brick, and installing brick fa�ade were working  greater than 10 feet from the lower level with no fall protection.
Recent events (1)
  • — Z (S) $3349

1926.1153 C01

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 5, 2023
Penalty
Initial $3,349 · Current $3,349
29 CFR  1926.1153(c)(1):  For each employee engaged in a task identified on Table 1, the employer did not fully and properly implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, unless the employer assesses and limits the exposure of the employee to respirable crystalline silica in accordance with paragraph (d) of this section:  a) On or about January 3, 2023,  employees performing masonry activities such as but not limited to cutting brick, and installing brick fa�ade were using a DeWalt masonry saw without using an integrated water delivery system.
Recent events (1)
  • — Z (S) $3349

View SLP Construction LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346420045.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.