Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ALLIANCE INDUSTRIES, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of ALLIANCE INDUSTRIES, INC. in 313 APPLETON ST., MENASHA, WI 54952 (NAICS 332812). OSHA activity number 346425895.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Alliance Industries, INC. — free Get an email when a new federal OSHA severe-injury report for Alliance Industries, INC. is published. One employer, no account, unsubscribe in one click.
Site address
313 APPLETON ST.
City
MENASHA
State
WI
ZIP
54952
Mailing
314 APPLETON ST., MENASHA, WI 54952
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332812
Employees
76
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 2 instances 5 exposed
Issued
Mar 31, 2023
Abate by
Apr 28, 2023
Penalty
Initial $6,250 · Current $4,375 Reduced
OSH ACT of 1970 Section (5)(a)(1):  The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees from crushing or struck by hazards created by hoist malfunction or failures:  On or about January 10, 2023 and prior, at an establishment located at 313 Appleton Street, in Menasha, Wisconsin; the employer had not developed a periodic and frequent inspection for the Harrington 1/4 Ton hoists and Harrington 1 Ton hoist while used to lift parts onto and off a conveyor line exposing employees to potential crushing or struck by hazards.
Recent events (2)
  • — I (S) $4375
  • — Z (S) $6250

1910.178 A04

Serious Gravity 5 1 instance 3 exposed
Issued
Mar 31, 2023
Abate by
Apr 28, 2023
Penalty
Initial $7,813 · Current $5,469 Reduced
29 CFR  1910.178(a)(4):  Modifications and additions which affect capacity and safe operation shall not be performed by the customer or user without manufacturers prior written approval. Capacity, operation, and maintenance instruction plates, tags, or decals shall be changed accordingly.  On or about January 10, 2023 and prior, at an establishment located at 313 Appleton Street, in Menasha, Wisconsin; the employer did not obtain written approval from the manufacturer prior to attaching and utilizing Ballymore personnel platform for employees to change out hoists from the line.
Recent events (3)
  • — I (S) $5469.1
  • — P (S) $5469.1
  • — Z (S) $7813

1910.178 Q07

Serious Gravity 5 2 instances 3 exposed
Issued
Mar 31, 2023
Abate by
Apr 28, 2023
Penalty
Initial $6,250 · Current $4,375 Reduced
29 CFR  1910.178(q)(7):  Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily. Where industrial trucks are used on a round-the-clock basis, they shall be examined after each shift. Defects when found shall be immediately reported and corrected.  On or about January 10, 2023 and prior, at an establishment located at 313 Appleton Street, in Menasha, Wisconsin; the employer had not ensured that the forklifts were inspected daily to ensure they were in safe operating condition prior to placing them in service.
Recent events (2)
  • — I (S) $4375
  • — Z (S) $6250

1910.178 L06

Other-than-serious 1 instance 1 exposed
Issued
Mar 31, 2023
Abate by
Apr 28, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.178(l)(6): Certification. The employer shall certify that each operator has been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation.  On or about January 10, 2023 and prior, at an establishment located at 313 Appleton Street, in Menasha, Wisconsin; the employer did not certify the completion of the forklift training and evaluation for each employee who operated the powered industrial vehicle.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Alliance Industries, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346425895.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.