Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PARAMOUNT BUILDERS, LTD.

Follow-up inspection · Safety discipline

On , OSHA opened a follow-up safety inspection of PARAMOUNT BUILDERS, LTD. in PARAMOUNT BUILDING 2 FAGAIMA INDUSTRIAL AREA, PAGO PAGO, AS 96799 (NAICS 236220). OSHA activity number 346450414.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Paramount Builders, LTD. — free Get an email when a new federal OSHA severe-injury report for Paramount Builders, LTD. is published. One employer, no account, unsubscribe in one click.
Site address
PARAMOUNT BUILDING 2 FAGAIMA INDUSTRIAL AREA
City
PAGO PAGO
State
AS
ZIP
96799
Mailing
PO BOX 2070, PAGO PAGO, AS 96799
Inspection type
Follow-up (F)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
236220
Employees
123
Ownership type
A

3 citations on file for this inspection.

1926.416 E01

Serious Gravity 1 1 instance 1 exposed
Issued
May 15, 2023
Abate by
May 25, 2023
Penalty
Initial $6,629 · Current $6,629
29 CFR  1926.416(e)(1): Worn or frayed electric cords or cables were used:  First floor by the stairs: The cord used to power the grinder was worn, cut, damaged, and had signs of overheating (pig tailing) exposing employees to electrical hazards.
Recent events (1)
  • — Z (S) $6629

1926.303 B01

Repeat Gravity 1 1 instance 1 exposed
Issued
May 15, 2023
Abate by
May 25, 2023
Penalty
Initial $13,258 · Current $13,258
29 CFR  1926.303(b)(1): Grinding machines were not equipped with safety guards in conformance with the requirements of ANSI B7.1-1970, Safety Code for the Use, Care, and Protection of abrasive wheels, and paragraph (d) of this section.  Work table: The grinder used to cut rebar for the elevator form was missing a guard, exposing employees to struck-by hazards.  Paramount Builders Inc. was previously cited for a repeat violation of this Occupational Safety and Health Standard 29 CFR 1926.303(b)(1), which was contained in OSHA inspection number 1602722, citation number 1, item number 1 and was affirmed as a final order on October 31, 2022 with respect to a workplace located at the Paramount Building 2 Fagaima Pago Pago, American Samoa.
Recent events (1)
  • — Z (R) $13258

1926.403 B02

Repeat Gravity 1 1 instance 1 exposed
Issued
May 15, 2023
Abate by
May 25, 2023
Penalty
Initial $13,258 · Current $13,258
29 CFR  1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification.  Third floor: An electrical receptacle box designed to be installed in a wall was mounted on the end of an extension cord to power a grinder. Employees were exposed to electrical hazards.  Paramount Builders Inc. was previously cited for a repeat violation of this Occupational Safety and Health Standard 29 CFR  1926.303(b)(1), which was contained in OSHA inspection number 1602722, citation number 1, item number 2b and was affirmed as a final order on October 31, 2022 with respect to a workplace located at the Paramount Building 2 Fagaima Pago Pago, American Samoa.
Recent events (1)
  • — Z (R) $13258

View Paramount Builders, LTD.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346450414.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.