Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: A AND A QUALITY APPLIANCE, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of A AND A QUALITY APPLIANCE, INC. in 600 KEMPER COMMONS CIRCLE, CINCINNATI, OH 45246 (NAICS 443141). OSHA activity number 346645799.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch A and a Quality Appliance, INC. — free Get an email when a new federal OSHA severe-injury report for A and a Quality Appliance, INC. is published. One employer, no account, unsubscribe in one click.
Site address
600 KEMPER COMMONS CIRCLE
City
CINCINNATI
State
OH
ZIP
45246
Mailing
600 KEMPER COMMONS CIRCLE, CINCINNATI, OH 45246
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
443141
Employees
21
Ownership type
A

4 citations on file for this inspection.

1910.176 C

Other-than-serious Gravity 5 1 instance 19 exposed
Issued
May 17, 2023
Penalty
Initial $8,036 · Current $0 Reduced
1910.176(c)  Housekeeping. Storage areas shall be kept free from accumulation of materials that constitute hazards from tripping, fire, explosion, or pest harborage. Vegetation control will be exercised when necessary. 29 CFR  1910.176(b): Secure storage. Storage of material shall not create a hazard. Bags, containers, bundles, etc., stored in tiers shall be stacked, blocked, interlocked and limited in height so that they are stable and secure against sliding or collapse.  a) On or about April 20, 2023, the employer did not ensure that the boxes, containing appliance replacement parts, in the parts department were properly stacked, blocked, interlocked and limited in height, exposing employees to struck by hazards.
Recent events (2)
  • — I (O) $0
  • — Z (S) $8036

1910.178 L01 II

Serious Gravity 10 1 instance 19 exposed
Issued
May 17, 2023
Penalty
Initial $14,063 · Current $8,036 Reduced
29 CFR  1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer shall ensure that each operator has successfully completed the training required by this paragraph (l), except as permitted by paragraph (l)(5).  a) On or about April 20, 2023, the employer did not ensure that all employees operating the clamp powered industrial truck in the warehouse had successfully completed the training required by OSHA.
Recent events (2)
  • — I (S) $8036
  • — Z (S) $14063

1910.178 Q07

Serious Gravity 5 1 instance 1 exposed
Issued
May 17, 2023
Abate by
Jun 6, 2023
Penalty
Initial $8,036 · Current $0 Reduced
29 CFR  1910.178(q)(7): Industrial trucks shall be examined before being placed in service, and shall not be placed in service if the examination shows any condition adversely affecting the safety of the vehicle. Such examination shall be made at least daily. Where industrial trucks are used on a round-the-clock basis, they shall be examined after each shift. Defects when found shall be immediately reported and corrected.  a) On or about April 20, 2023, the employer did not ensure that employees were conducting the clamp truck inspections prior to the shift operation of the two clamp trucks at the location.
Recent events (2)
  • — I (S) $0
  • — Z (S) $8036

1910.132 D02

Other-than-serious 1 instance 19 exposed
Issued
May 17, 2023
Abate by
Jun 6, 2023
Penalty
Initial $0 · Current $0
29 CFR  1910.132(d)(2): The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.   a) On or about April 20, 2023, the employer did not have a written certification of hazard assessment verifying that the required workplace hazard assessment had been performed.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View A and a Quality Appliance, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346645799.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.