Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BAE SYSTEMS ORDNANCE SYSTEMS, INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of BAE SYSTEMS ORDNANCE SYSTEMS, INC. in 4050 PEPPERS FERRY RD NW, RADFORD, VA 24141 (NAICS 325920). OSHA activity number 346800584.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch BAE Systems Ordnance Systems, INC. — free Get an email when a new federal OSHA severe-injury report for BAE Systems Ordnance Systems, INC. is published. One employer, no account, unsubscribe in one click.
Site address
4050 PEPPERS FERRY RD NW
City
RADFORD
State
VA
ZIP
24141
Mailing
4050 PEPPERS FERRY RD NW, RADFORD, VA 24141
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
325920
Employees
1132
Ownership type
A

4 citations on file for this inspection.

1910.22 D01

Serious Gravity 1 1 instance 27 exposed
Issued
Oct 5, 2023
Abate by
Nov 1, 2023
Penalty
Initial $6,696 · Current $6,696
29 CFR 1910.22(d)(1): The employer did not ensure that walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition:   a)	Radford Army Ammunition Plant, sulfuric acid, weak and pyro tank areas: On or about June 21, 2023, employer failed to regularly inspect the walking-working surfaces as a result exposed employees to possible injuries.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $6696

1910.22 D02

Serious Gravity 1 1 instance 27 exposed
Issued
Oct 5, 2023
Abate by
Nov 1, 2023
Penalty
Initial $0 · Current $0
29 CFR 1910.22(d)(2): The employer did not ensure that hazardous conditions on walking-working surfaces are corrected or repaired before an employee uses the walking-working surface again. The employer did not ensure that if the correction or repair cannot be made immediately, the hazard is guarded to prevent employees from using the walking-working surface until the hazard is corrected or repaired:  a)	Radford Army Ammunition Plant, sulfuric acid, weak and pyro tank areas: On or about June 21, 2023, employer failed to ensure that  unsafe walking-working surfaces not immediately repair was guarded to restrict access to employees.  Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $0

1910.29 B03

Serious Gravity 5 1 instance 27 exposed
Issued
Oct 5, 2023
Abate by
Nov 1, 2023
Penalty
Initial $11,162 · Current $11,162
29 CFR 1910.29(b)(3): The employer did not ensure that guardrail systems are capable of withstanding, without failure, a force of at least 200 pounds (890 N) applied in a downward or outward direction within 2 inches (5 cm) of the top edge, at any point along the top rail:  a)	Radford Army Ammunition Plant, sulfuric acid, weak and pyro tank areas: On or about June 21, 2023, employees are exposed to a possible fall hazard resulting from severely weathered top rails of guardrail systems exceeding 2 inches in the outward direction when force is applied.   Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $11162

1910.29 B06

Serious Gravity 1 1 instance 27 exposed
Issued
Oct 5, 2023
Abate by
Nov 1, 2023
Penalty
Initial $6,696 · Current $6,696
29 CFR 1910.29(b)(6): The employer did not ensure that guardrail systems are smooth-surfaced to protect employees from injury, such as punctures or lacerations, and to prevent catching or snagging of clothing:  a)	Radford Army Ammunition Plant, sulfuric acid, weak and pyro tank areas : On or about June 21, 2023, employees routinely accessed walkways where surfaces of guardrails are creaking and splintering thereby exposing employees to possible lacerations or punctures.   Abatement certification required within 10 days after abatement date.  The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (1)
  • — Z (S) $6696

View BAE Systems Ordnance Systems, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346800584.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.