YORK, PA —
OSHA Inspection: YORK WALLCOVERINGS INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of YORK WALLCOVERINGS INC. in 750 LINDEN AVENUE, YORK, PA 17404 (NAICS 323111). OSHA activity number 346909294.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch York Wallcoverings INC. — free
Get an email when a new federal OSHA severe-injury report for York Wallcoverings INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- YORK WALLCOVERINGS INC.
- Site address
- 750 LINDEN AVENUE
- City
- YORK
- State
- PA
- ZIP
- 17404
- Mailing
- 750 LINDEN AVENUE ATTN: JENNIFER LLOYD, YORK, PA 17404
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 323111
- Employees
- 200
- Ownership type
- A
Citations
4 citations on file for this inspection.
5(a)(1)
- Issued
- Sep 28, 2023
- Abate by
- Feb 2, 2024
- Penalty
- Initial $11,162 · Current $15,625
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1) The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees a) Press 125 - Employees performed service and maintenance work on Press 125, and the employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees, on or about August 15, 2023. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $15625
- — Z (S) $11162
1910.147 F03 II D
- Issued
- Sep 28, 2023
- Abate by
- Oct 25, 2023
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(3)(ii)(D): Each authorized employee did not affix a personal lockout or tagout device to the group lockout device before working on the machine or equipment: a) Press 126 - Employees performed service and maintenance on Press 126 and each authorized employee did not apply their own lock to the electrical energy-isolating device, on or about August 15, 2023. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C06 I
- Issued
- Sep 28, 2023
- Abate by
- Nov 2, 2023
- Penalty
- Initial $446 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Press 125 and 126 - The employer had not performed an annual periodic inspection on the energy control procedures where employees perform service and maintenance on equipment such as presses 125 and 126, on or about August 15, 2023. Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records. The York Wallcoverings, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.147(c)(6)(i), which was contained in OSHA inspection number 1372460, citation number 3, item number 1, and was affirmed as a final order on March 7, 2019, with respect to a workplace located at 2075 Loucks Road, York, PA 17404. The York Wallcoverings, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.147(c)(6)(i), which was contained in OSHA inspection number 1365459, citation number 2, item number 1, and was affirmed as a final order on February 25, 2019, with respect to a workplace located at 750 Linden Avenue, York, PA 17404.
Recent events (2)
- — I (R) $0
- — Z (R) $446
5(a)(1)
- Issued
- Sep 28, 2023
- Abate by
- Feb 2, 2024
- Penalty
- Initial $44,645 · Current $15,625 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1) The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees 29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Surface Press 101 - employees were working where ingoing nip points at the ink rollers were not guarded, on or about August 15, 2023. Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records. The York Wallcoverings, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.212(a)(1), which was contained in OSHA inspection number 1372460, citation number 2, item number 1 and was affirmed as a final order on March 7, 2019, with respect to a workplace located at 2075 Loucks Road, York, PA 17404.
Recent events (2)
- — I (S) $15625
- — Z (R) $44645
More inspections at York Wallcoverings INC.
Aug 18, 2023
YORK, PA
Aug 18, 2023
YORK, PA
Aug 15, 2023
YORK, PA
Dec 10, 2018
YORK, PA
May 28, 2015
YORK, PA
View York Wallcoverings INC.'s full OSHA safety record →
More inspections in this industry (NAICS 323111)
Jul 16, 2026
Something Inked · NASHVILLE, TN
Jul 13, 2026
Mann-Pak · MIDDLE RIVER, MD
Jul 8, 2026
Graphics House Publishing, INC · MUSKEGON, MI
Jul 2, 2026
Innotech Laser · WARMINSTER, PA
Jul 1, 2026
CCL Container, INC. · HERMITAGE, PA
More inspections in PA
Jul 17, 2026
FOX Tapping INC. · COLUMBIA, PA
Jul 17, 2026
Columbia Water CO · COLUMBIA, PA
Jul 17, 2026
NEW Enterprise Stone & Lime CO., INC. · WILKES BARRE, PA
Jul 16, 2026
Mukhleen Gernaros Pizza LLC DBA Genaro'S Pizzeria and Steaks · PHILADELPHIA, PA
Jul 16, 2026
Center City Construction and Development, LLC · PHILADELPHIA, PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 346909294.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.