Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: R & L SIDING, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of R & L SIDING, LLC in 2482-2492 ARTESIAN WAY, NEFFSVILLE, PA 17601 (NAICS 238160). OSHA activity number 347083263.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch R & L Siding, LLC — free Get an email when a new federal OSHA severe-injury report for R & L Siding, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
R & L SIDING, LLC
Site address
2482-2492 ARTESIAN WAY
City
NEFFSVILLE
State
PA
ZIP
17601
Mailing
3835 YOST ROAD, GORDONVILLE, PA 17529
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
5
Ownership type
A

4 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 1 instance 5 exposed
Issued
Mar 27, 2024
Abate by
Apr 15, 2024
Penalty
Initial $5,071 · Current $0 Reduced
OSH ACT of 1970 Section (5)(a)(1)  The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees:  a)  2482-2492 Artesian Way Neffsville PA, Jobsite Roof - On or about November 3, 2023, Employees worked from an elevated platform with the end rails down while attached to a Genie GTH-844 telehandler boom exposing employees to fall hazards up to approximately 20 feet.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5071

1926.602 C01 II

Serious Gravity 5 1 instance 5 exposed
Issued
Mar 27, 2024
Abate by
Apr 15, 2024
Penalty
Initial $0 · Current $0
29 CFR 1926.602(c)(1)(ii): Modifications or additions affecting the safe operation of the equipment were made without the manufacturer's written approval: Note:  If such modifications or changes were made, the capacity, operation, and maintenance instruction plates, tags, or decals should have been changed accordingly.   a)  2482-2492 Artesian Way Neffsville PA, Jobsite Roof - On or about November 3, 2023, Employees utilized an elevated platform attached to the Genie GTH-844 telehandler boom without the manufacturer's written approval that was extended to approximately 20 feet from the ground.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.602 C01 VI

Serious Gravity 10 2 instances 5 exposed
Issued
Mar 27, 2024
Abate by
Apr 15, 2024
Penalty
Initial $0 · Current $0
29 CFR 1926.602(c)(1)(vi): Industrial truck(s) in use did not meet the applicable requirements of design, construction, stability, inspection, testing, maintenance, and operation, as defined in American National Standards Institute B56.1-1969, Safety Standards for Powered Industrial Trucks.  a)  2482-2492 Artesian Way Neffsville PA, Jobsite Roof - On or about November 3, 2023, employees were observed working from an elevated platform supported on the forks of a Genie GTH-844 telehandler. The operator had dismounted the cab leaving the forks elevated and no one at the controls exposing the employees to an approximate 20-foot fall hazard to the ground below.  b) 2482-2492 Artesian Way Neffsville PA, Jobsite Roof - On or about November 3, 2023, the employer allowed employees to operate a Genie GTH-844 telehandler with a severely damaged tire.   Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1926.503 C03

Serious Gravity 10 1 instance 5 exposed
Issued
Mar 27, 2024
Penalty
Initial $7,098 · Current $7,000 Reduced
1926.503(c)(3)  Inadequacies in an affected employee's knowledge or use of fall protection systems or equipment indicate that the employee has not retained the requisite understanding or skill: 29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   a)  2482-2492 Artesian Way Neffsville PA, Jobsite Roof - On or about November 3, 2023, Employees performed residential roofing activities on a steep residential roof donned a body harness as part of a personal fall arrest system but did not attach to an anchor point and were exposed to fall hazards up to approximately 20 feet.  Corrected during the inspection, no abatement certification or documentation required.
Recent events (2)
  • — I (S) $7000
  • — Z (S) $7098

View R & L Siding, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347083263.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.