Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LANAC CARPENTRY INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LANAC CARPENTRY INC. in BUILDING 5, LUMBERTON, NJ 08048 (NAICS 238130). OSHA activity number 347143927.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Lanac Carpentry INC. — free Get an email when a new federal OSHA severe-injury report for Lanac Carpentry INC. is published. One employer, no account, unsubscribe in one click.
Site address
BUILDING 5
City
LUMBERTON
State
NJ
ZIP
08048
Mailing
210 A CHESNUT STREET, DELRAN, NJ 08075
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
17
Ownership type
A

3 citations on file for this inspection.

1926.501 B11

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 21, 2024
Abate by
Dec 16, 2024
Penalty
Initial $7,098 · Current $3,600 Reduced
29 CFR  1926.501(b)(11): Each employee on a steep roof with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems with toeboards, safety net systems, or personal fall arrest systems:   a- Building 5, Lumberton NJ:   A worker applying sheathing onto the exterior surface of a commercial structure's pitched roof trusses, and performing other related activities, was not protected from falling while wearing a full body harness that was not attached to an anchor with a lanyard or other approved means.  As such, this worker was exposed to fall hazards in excess of 30 feet 4 inches to the ground surface below. Condition observed and noted on or about 12/05/23.  NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — C (S) $7098
  • — J (S) $3600
  • — Z (S) $7098

1926.502 D16

Serious Gravity 10 2 instances 4 exposed
Issued
Feb 21, 2024
Abate by
Dec 16, 2024
Penalty
Initial $7,098 · Current $3,600 Reduced
29 CFR  1926.502(d)(16): Personal fall arrest systems, when stopping a fall, shall be rigged such that an employee can neither free fall more than 6 feet (1.8 m), nor contact any lower level:   a- Building 5, Lumberton NJ:   Workers applying sheathing onto the exterior surface of a commercial structure's pitched roof trusses, and performing other related activities, were not protected from falling while wearing full body harnesses whose self retracting life line's housing were attached to nylon straps that were wrapped around either a single wooden roof truss chord or metal gusset plate within a roof truss.   As such, these workers were exposed to fall hazards in excess of 30 feet 4 inches to the ground surface below. Condition observed and noted on or about 12/05/23.  b - Building 5, Lumberton NJ:   A worker, walking within the inner chords of wooden roof trusses, was not protected to fall hazards when their self retracting life line's extended line was exposed to being damaged and would not have retracted as designed if the worker had fallen while the worker was within these trusses .  As such, this worker was exposed to fall hazards in excess of 10 feet 8 inches to the flooring below. Condition observed and noted on or about 12/05/23.  NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — C (S) $7098
  • — J (S) $3600
  • — Z (S) $7098

1926.503 A02

Serious Gravity 5 1 instance 5 exposed
Issued
Feb 21, 2024
Abate by
Dec 16, 2024
Penalty
Initial $5,071 · Current $2,600 Reduced
29 CFR  1926.503(a)(2): The employer did not assure that each employee exposed to fall hazards was trained by a competent person qualified in the areas specified in 29 CFR 1926.503 (a)(2)(i) through (viii)    a - Building 5, Lumberton NJ:   Workers sheathing the pitched roof of a commercial building were not trained on fall protection means and methods as specified in 29 CFR 1926.503(a)(2)(i) through (viii).  These workers were exposed to fall hazards up to 30 feet 4 inches while wearing full body harnesses whose attached self retracting life line's housing were anchored improperly and not being used as per the manufacturer's requirements. Condition noted on or about 12/05/23.  NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (3)
  • — C (S) $5071
  • — J (S) $2600
  • — Z (S) $5071

View Lanac Carpentry INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347143927.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.