Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LANAC CARPENTRY INC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of LANAC CARPENTRY INC in 1712 HANCOCK LANE, BURLINGTON, NJ 08016 (NAICS 238130). OSHA activity number 347729774.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Lanac Carpentry INC — free Get an email when a new federal OSHA severe-injury report for Lanac Carpentry INC is published. One employer, no account, unsubscribe in one click.
Establishment
LANAC CARPENTRY INC
Site address
1712 HANCOCK LANE
City
BURLINGTON
State
NJ
ZIP
08016
Mailing
101 ROUTE 130 SUITE 20, CINNAMINSON, NJ 08077
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
11
Ownership type
A

2 citations on file for this inspection.

1926.502 D16

Serious Gravity 10 2 instances 4 exposed
Issued
Nov 6, 2024
Penalty
Initial $7,098 · Current $3,500 Reduced
29 CFR  1926.502(d)(16): Personal fall arrest systems, when stopping a fall, shall be rigged such that an employee can neither free fall more than 6 feet (1.8 m), nor contact any lower level:   a- 1712 Hancock Lane, Burlington NJ:   A worker installing roof trusses onto a commerical structure, and performing other related activites, was exposed to fall hazards (in excess of 25 feet to the flooring below) when their full body harness was connected to a self retracting life line whose housing was connected to wooden roof trusses with a nylon strap that was wrapped around metal gusset plates exposing it to damage.  Condition observed on or about 09/03/24.  b - 1712 Hancock Lane, Burlington NJ:   Four workers installing a commercial structure's roof trusses and roof truss peaks, and performing other related activities, were exposed to fall hazards (in excess of 30 feet to the ground surface below) when they were not using their self retracting lifeline units as designed and designated by their manufacturer's operating requirements. The housing for these self retracting lifelines were either set below the worker or set horizontally (not above) 3 to 5 feet from where these workers were working.   As such, these workers were exposed to fall hazards ranging from 8 feet (from the roof truss to the structure's indoor flooring to greater than 20 feet (from the unprotected edges to the ground surface below). Conditions observed on or about 09/03/24.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $7098

1926.503 A02

Serious Gravity 5 1 instance 4 exposed
Issued
Nov 6, 2024
Abate by
Nov 15, 2024
Penalty
Initial $5,071 · Current $2,500 Reduced
29 CFR  1926.503(a)(2): The employer did not assure that each employee exposed to fall hazards was trained by a competent person qualified in the areas specified in 29 CFR 1926.503 (a)(2)(i) through (viii)    a - 1712 Hancock Lane, Burlington NJ:   Workers performing framing working consisting of but not limited to the installation of roof trusses and roof truss peaks onto a commercial building were not trained on fall protection means and methods as specified in 29 CFR 1926.503(a)(2)(i) through (viii).  These workers were exposed to fall hazards up to and in excess of 30 feet while wearing full body harnesses whose attached self retracting life line's housing were anchored improperly and/or not being used as per the manufacturer's requirements. Condition noted on or about 09/03/24.  NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM. FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $1000.00 IN ACCORDANCE WITH 29 CFR 1903.19.
Recent events (2)
  • — I (S) $2500
  • — Z (S) $5071

View Lanac Carpentry INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347729774.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.