SYRACUSE, NY —
OSHA Inspection: SYRACUSE FIBER RECYCLING LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SYRACUSE FIBER RECYCLING LLC in 1416 WILLIS AVE., SYRACUSE, NY 13204 (NAICS 423930). OSHA activity number 347229437.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SYRACUSE FIBER RECYCLING LLC
- Site address
- 1416 WILLIS AVE.
- City
- SYRACUSE
- State
- NY
- ZIP
- 13204
- Mailing
- P.O. BOX 8, SYRACUSE, NY 13204
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423930
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.178 L03
- Issued
- Jul 19, 2024
- Abate by
- Aug 7, 2024
- Penalty
- Initial $2,074 · Current $1,244 Reduced
General-duty citation text
29 CFR 1910.178(l)(3):Training program content. Powered industrial truck operators did not receive initial training in accordance with paragraph (l) of this section: a) On or about 1/24/2024, Production area: The employer did not provide powered industrial truck operators with initial training regarding operating instructions, warnings, and precautions for the types of truck the operator was authorized to operate.
Recent events (2)
- — I (S) $1244.4
- — Z (S) $2074
1910.178 L04 III
- Issued
- Jul 19, 2024
- Abate by
- Aug 7, 2024
- Penalty
- Initial $3,457 · Current $2,074 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) On or about 1/24/2024, Production area: The employer did not evaluate each powered industrial truck operator's performance at least once every 3 years.
Recent events (2)
- — I (S) $2074.2
- — Z (S) $3457
1910.212 A01
- Issued
- Jul 19, 2024
- Abate by
- Aug 7, 2024
- Penalty
- Initial $4,148 · Current $2,489 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 1/24/2024, Process Area: The rotating wheel of a Makita Angle Grinder was not guarded.
Recent events (2)
- — I (S) $2488.8
- — Z (S) $4148
1910.303 B02
- Issued
- Jul 19, 2024
- Abate by
- Aug 14, 2024
- Penalty
- Initial $3,457 · Current $2,074 Reduced
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a) On or about 1/24/2024, Production floor: The electrical cord for a Skyjack scissor lift was damaged, exposing internal wire components.
Recent events (2)
- — I (S) $2074.2
- — Z (S) $3457
1910.305 G01 IV A
- Issued
- Jul 19, 2024
- Abate by
- Aug 7, 2024
- Penalty
- Initial $2,074 · Current $1,244 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) On or about 1/24/2024, Exterior of the Facility: An extension cord was being used to power a Mirabito Fuel Tank.
Recent events (2)
- — I (S) $1244.4
- — Z (S) $2074
1910.305 G01 IV B
- Issued
- Jul 19, 2024
- Abate by
- Aug 7, 2024
- Penalty
- Initial $2,074 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(B): Flexible cords and cables were used and run through holes in walls, ceilings, or floors: a) On or about 1/24/2024, Maintenance Area: An extension cord used to power a Mirabito fuel tank was run through a hole in the wall and plugged into an outlet.
Recent events (2)
- — I (S) $0
- — Z (S) $2074
More inspections at Syracuse Fiber Recycling LLC
View Syracuse Fiber Recycling LLC's full OSHA safety record →
More inspections in this industry (NAICS 423930)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347229437.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.