WHITE PLAINS, NY —
OSHA Inspection: ASF CONSTRUCTION & EXCAVATION CORP.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ASF CONSTRUCTION & EXCAVATION CORP. in 5--7 COTTAGE PLACE, WHITE PLAINS, NY 10601 (NAICS 238190). OSHA activity number 347284770.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ASF CONSTRUCTION & EXCAVATION CORP.
- Site address
- 5--7 COTTAGE PLACE
- City
- WHITE PLAINS
- State
- NY
- ZIP
- 10601
- Mailing
- 37 ROA HOOK ROAD, CORTLANDT MANOR, NY 10567
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238190
- Employees
- 101
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.304 I01
- Issued
- Mar 19, 2024
- Penalty
- Initial $11,409 · Current $5,882 Reduced
General-duty citation text
29 CFR 1926.304(i)(1): Each circular had-fed ripsaw was not guarded by a hood which completely enclosed that portion of the saw above the table and that portion of the saw above the material being cut: location: 7th floor on or about: 2/14/24 a) An employee was using a DeWalt table saw while engaged in carpentry work. The saw did not have a guard covering the blade above the table. NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (3)
- — F (S) $5882
- — C (S) $11409
- — Z (S) $11409
1926.501 B02 I
- Issued
- Mar 19, 2024
- Penalty
- Initial $15,970 · Current $8,236 Reduced
General-duty citation text
29 CFR 1926.501(b)(2)(i): Each employee who was constructing a leading edge 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems, safety net systems, or personal fall arrest systems: location: 7th floor on or about: 2/14/24 a) Employees, installing decking/formwork, were exposed to a fall of 9'4" at the leading edge of the floor. NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (3)
- — F (S) $8236
- — C (S) $15970
- — Z (S) $15970
1926.501 B04 I
- Issued
- Mar 19, 2024
- Penalty
- Initial $11,409 · Current $5,882 Reduced
General-duty citation text
29 CFR 1926.501(b)(4)(i): Each employee on walking/working surfaces was not protected from falling through holes (including skylights) more than 6 feet (1.8 m) above lower levels, by personal fall arrest systems, covers, or guardrail systems erected around such holes: location: 6th floor on or about: 2/14/24 a) Employees were using a ladder placed in a duct opening to access the 6th floor. The employees, using the access and working around the 32"X40" opening, were not provided with fall protection. The employees were exposed to a fall of 18'8". NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (3)
- — F (S) $5882
- — C (S) $11409
- — Z (S) $11409
1926.405 G02 IV
- Issued
- Mar 19, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: location: 6th floor on or about: 2/14/24 a) Employees were using a DeWalt drill (DW235G), while engaged in concrete work. The cord of the drill was not provided with strain relief. NOTE: Because abatement of this violation is already documented in the inspection casefile, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19.
Recent events (3)
- — F (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at ASF Construction & Excavation Corp.
View ASF Construction & Excavation Corp.'s full OSHA safety record →
More inspections in this industry (NAICS 238190)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347284770.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.