Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: HYCOM INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of HYCOM INC. in 374 5TH STREET NW, BARBERTON, OH 44203 (NAICS 333611). OSHA activity number 347324329.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Hycom INC. — free Get an email when a new federal OSHA severe-injury report for Hycom INC. is published. One employer, no account, unsubscribe in one click.
Establishment
HYCOM INC.
Site address
374 5TH STREET NW
City
BARBERTON
State
OH
ZIP
44203
Mailing
374 5TH STREET NW, BARBERTON, OH 44203
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
333611
Employees
100
Ownership type
A

3 citations on file for this inspection.

1910.147 C04 I

Serious Gravity 5 1 instance 1 exposed
Issued
Jun 24, 2024
Abate by
Aug 9, 2024
Penalty
Initial $8,873 · Current $5,000 Reduced
29 CFR  1910.147(c)(4)(i): Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.   On or about February 29, 2024, an employee did not utilize equipment specific procedures to ensure energy control methods are in place prior to performing set-up procedures by exchanging dyes with-in the point of operation area [clamping area, die and tube stop] on a Hydraulic Flaring Machine, known as Big Blue.
Recent events (2)
  • — I (S) $5000
  • — Z (S) $8873

1910.1030 G02 I

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Jun 24, 2024
Abate by
Aug 9, 2024
Penalty
Initial $8,873 · Current $0 Reduced
29 CFR  1910.1030(g)(2)(i): 29 CFR 1910.1030(g)(2)(i): The employer shall train each employee with occupational exposure in accordance with the requirements of this section. Such training must be provided at no cost to the employee and during working hours. The employer shall institute a training program and ensure employee participation in the program.  On or about February 29, 2024, the employer did not ensure that training was provided to a supervisor with occupational exposure or other potentially infectious materials when providing first aid to an injured employee. The employers blood borne pathogens programs assigns both first aid responders and supervisors to be trained in medical or first aid duties by their employers in accordance with 29 CFR 1910.1030(g)(2)(i).
Recent events (2)
  • — I (S) $0
  • — Z (S) $8873

1910.212 A03 II

Repeat Gravity 10 1 instance 1 exposed
Issued
Jun 24, 2024
Abate by
Aug 9, 2024
Penalty
Initial $62,104 · Current $40,000 Reduced
29 CFR  1910.212(a)(3)(ii): The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.  a.  On or about February 29, 2024, the employer did not ensure the point of operation [clamping area, die and tube stop] of the Hydraulic Flaring Machine, known as Big Blue, was guarded to prevent the operator from having any part of his body in the danger zone during the operation cycle.  Hycom Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.212(a)(1), which was contained in OSHA inspection number 1665199, citation number 1, item number 1, and was affirmed as a final order on August 3, 2023, with respect to a workplace located at 374 5th Street, NW, Barberton, Ohio.  Hycom Inc., was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.212(a)(1), which was contained in OSHA inspection number 1513105, citation number 1, item number 1, and was affirmed as a final order on March 30, 2021, with respect to a workplace located at 374 5th Street, NW, Barberton, Ohio.
Recent events (2)
  • — I (R) $40000
  • — Z (R) $62104

View Hycom INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347324329.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.