Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: KW FRAMING, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of KW FRAMING, INC. in 8036 - 8044 NORTH 80TH STREET, RIVER GROVE, IL 60171 (NAICS 238130). OSHA activity number 347465304.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch KW Framing, INC. — free Get an email when a new federal OSHA severe-injury report for KW Framing, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
KW FRAMING, INC.
Site address
8036 - 8044 NORTH 80TH STREET
City
RIVER GROVE
State
IL
ZIP
60171
Mailing
8014 DEER PATH, JUSTICE, IL 60458
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

4 citations on file for this inspection.

1903.19 C01

Other-than-serious 1 instance 1 exposed
Issued
Nov 14, 2024
Abate by
Dec 18, 2024
Penalty
Initial $996 · Current $996
KW Framing, Inc. failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:   Citation Number������������Item Number��������������������Abatement Date �02�                                        01�                                         08/15/2024  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF THE CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (O) $996

1926.1052 C01 II

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 25, 2024
Penalty
Initial $8,873 · Current $8,873
29 CFR 1926.1052(c)(1)(ii):  Stairways having four or more risers or rising more than 30 inches (76 cm), whichever is less, were not equipped with at least one handrail and one stairrail system along each unprotected side or edge:  a) On or about May 7, 2024, employees were accessing the upper floors of the building by using stairways that did not have stair rail systems along the unprotected sides.  No abatement certification or documentation is required for this item.
Recent events (1)
  • — Z (S) $8873

1926.501 B13

Willful Gravity 10 1 instance 4 exposed
Issued
Jul 25, 2024
Abate by
Aug 20, 2024
Penalty
Initial $124,219 · Current $124,219
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   The employer does not protect each employee from fall hazards while engaged in carpentry activities 6 feet or more above lower levels by the use of guardrail system, safety net system, or personal fall arrest system.  This most recently occurred on May 7, 2024, at 8036 - 8044 North 80th Street, River Grove, IL 60171 . Employees engaged in carpentry activities are not protected from fall hazards while working at elevations of greater than 30 feet above the ground.   Pursuant to 29 CFR 1903.19, the employer must submit documents describing the steps it taking to ensure compliance, including an explanation of how these steps protect its employees from fall hazards.
Recent events (1)
  • — Z (W) $124219

1926.503 B01

Other-than-serious 1 instance 1 exposed
Issued
Jul 25, 2024
Abate by
Aug 20, 2024
Penalty
Initial $0 · Current $0
29 CFR 1926.503(b)(1):  The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer:  a) On or about May 7,2024, the employer did not maintain records or certification of fall protection training for employees exposed to fall hazards.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (1)
  • — Z (O) $0

View KW Framing, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347465304.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.