Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: COLORADO ARCHITECTURAL MILLWORK SUPPLY, INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of COLORADO ARCHITECTURAL MILLWORK SUPPLY, INC. in 163 TALAMINE COURT, COLORADO SPRINGS, CO 80907 (NAICS 337212). OSHA activity number 347485815.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Colorado Architectural Millwork Supply, INC. — free Get an email when a new federal OSHA severe-injury report for Colorado Architectural Millwork Supply, INC. is published. One employer, no account, unsubscribe in one click.
Site address
163 TALAMINE COURT
City
COLORADO SPRINGS
State
CO
ZIP
80907
Mailing
163 TALEMINE COURT, COLORADO SPRINGS, CO 80907
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337212
Employees
28
Ownership type
A

9 citations on file for this inspection.

1910.134 D01 III

Serious Gravity 5 2 instances 6 exposed
Issued
Jul 25, 2024
Abate by
Sep 13, 2024
Penalty
Initial $6,857 · Current $3,500 Reduced

Hazardous substances 044012902590

29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace:  a) Veneering department:  On or about May 16, 2024, and at times prior, the employer did not evaluate respiratory hazards where employees mix and heat chemicals with respiratory hazards including but not limited to Casco-Resin PL-210 used to affix veneers.  b) Spray finishing department: On or about May 16, 2024, and at times prior, the employer did not evaluate respiratory hazards where employees spray lacquer finishes with respiratory hazards including but not limited to MAGNASAND Precat Sealer, MAGNAMAX Precatalyzed Lacquer.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $6857

1910.134 E01

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 25, 2024
Abate by
Sep 13, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a) On or about May 16, 2024, and at times prior, employees required to use tight-fitting respirators when applying spray finishes were not provided a medical evaluation prior to respirator use in the workplace.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F01

Serious Gravity 5 1 instance 4 exposed
Issued
Jul 25, 2024
Abate by
Sep 13, 2024
Penalty
Initial $0 · Current $0

Hazardous substances 044012902590

29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):  a) On or about May 16, 2024, and at times prior, employees required to use tight-fitting respirators when applying spray finishes were not provided fit testing prior to initial use of respirators in the workplace and were not fit tested at least annually thereafter.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 G01 I A

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 25, 2024
Abate by
Aug 22, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.134(g)(1)(i)(A): Respirators with tight-fitting facepieces were worn by employees who had facial hair that came between the sealing surface of the facepiece and the face or that interfered with valve function:  (a) On or about May 16, 2024, and at times prior, the employer did not ensure that employees required to wear respirators with tight-fitting facepieces did not have facial hair that came between the sealing surface of the facepiece and their face. Employees mix and spray chemicals with respiratory hazards including but not limited to MagnaMax Pre-catalyzed Lacquer and MagnaSand Pre-Catalyzed Sealer.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.151 C

Serious Gravity 5 1 instance 2 exposed
Issued
Jul 25, 2024
Abate by
Sep 13, 2024
Penalty
Initial $5,485 · Current $2,700 Reduced
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use:  a) Finishing department: On or about May 16, 2024, and at times prior, the employer did not provide employees in the finishing department suitable facilities for flushing of the eyes. Employees mix and spray corrosive chemicals including, but not limited to, MagnaMax Pre-catalyzed Lacquer and MagnaSand Pre-Catalyzed Sealer. Eye exposure to corrosive chemicals in the finishing department may result in serious, permanent eye damage.
Recent events (2)
  • — I (S) $2700
  • — Z (S) $5485

1910.213 C01

Serious Gravity 5 3 instances 2 exposed
Issued
Jul 25, 2024
Abate by
Sep 13, 2024
Penalty
Initial $6,857 · Current $3,500 Reduced
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut:  a)  On or about May 16, 2024, and at times prior, the employer did not ensure employees, who were required to operate an Altendorf F-45 Sliding Table Saw [SN: 85-9-177], were protected from amputation hazards in that the point of operation was not guarded.  The adjustable guard had been raised to accommodate a modification extending the sliding guide.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $6857

1910.213 F01

Serious Gravity 5 3 instances 2 exposed
Issued
Jul 25, 2024
Abate by
Sep 13, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.213(f)(1): Feed rolls and saws on self-feed circular saw(s) were not protected by a hood or guard to prevent the hands of the operator from coming in contact with the in-running rolls:   a) On or about May 16, 2024, and at times prior, the employer did not ensure employees, who were required to operate a Martin Spindle Shaper with Steff Feeder Model 2038, were protected from amputation hazards in that the point of operation was not guarded.     b) On or about May 16, 2024, and at times prior, the employer did not ensure employees, who were required to operate a Tannewitz Table Saw 2048 [SN: 13655] with Steff 2048 Power Feeder, were protected from amputation hazards in that the point of operation was not guarded.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 B02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Jul 25, 2024
Abate by
Sep 13, 2024
Penalty
Initial $4,113 · Current $0 Reduced
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy:  a)	On or about May 16, 2024, and at times prior, a duplex outlet located on the North wall of the veneer department did not have a cover or faceplate. The outlet had inner conductors exposed and was providing electrical power to an extension cord and a scale. This condition exposed employees to electrical shock and burn hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $4113

1910.1048 D01 I

Other-than-serious 1 instance 2 exposed
Issued
Jul 25, 2024
Abate by
Sep 13, 2024
Penalty
Initial $0 · Current $0
29 CFR 1910.1048(d)(1)(i): Employees of a workplace covered by this standard were not monitored to determine their exposure to formaldehyde:  a) Veneering department:  On or about May 16, 2024, and at times prior, the employer did not evaluate respiratory hazards where employees mix and heat materials containing formaldehyde including, but not limited to, Casco-Resin PL-210. Exposure to formaldehyde can irritate the skin, throat, lungs, and eyes with repeated exposure to formaldehyde possibly leading to cancer.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Colorado Architectural Millwork Supply, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347485815.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.