DAYTON, OH —
OSHA Inspection: FCA, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of FCA, LLC in 3970 IMAGE DRIVE, DAYTON, OH 45414 (NAICS 321920). OSHA activity number 347544934.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FCA, LLC
- Site address
- 3970 IMAGE DRIVE
- City
- DAYTON
- State
- OH
- ZIP
- 45414
- Mailing
- 3970 IMAGE DRIVE, DAYTON, OH 45414
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321920
- Employees
- 30
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.9 B
- Issued
- Jul 3, 2024
- Abate by
- Jul 30, 2024
- Penalty
- Initial $16,131 · Current $6,000 Reduced
General-duty citation text
1910.9(b) Training. Standards in this part requiring training on hazards and related matters, such as standards requiring that employees receive training or that the employer train employees, provide training to employees, or institute or implement a training program, impose a separate compliance duty with respect to each employee covered by the requirement. The employer must train each affected employee in the manner required by the standard, and each failure to train an employee may be considered a separate violation. [FR 73 75583, Dec. 12, 2008] 29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces are kept in a clean, orderly, and sanitary condition. a) On or about June 5, 2024, the employer did not ensure the work floor around the Cummins assembly area by the back dock were kept in a clean and orderly manner, employees were exposed to tripping and caught in hazards from air hoses laying on the ground in the work area. An employee's leg was caught in the air hose of a nail gun, causing the employees to come in contact with the actuating device of the nail gun, resulting in a puncture injury. b) On or about June 12, 2024, the employer did not ensure the work floor around the Cummins assembly area by the back dock were kept in a clean and orderly manner, employees were exposed to tripping and caught in hazards from air hoses laying on the ground in the work area.
Recent events (2)
- — I (S) $6000
- — Z (S) $16131
1910.22 D01
- Issued
- Jul 3, 2024
- Abate by
- Jul 30, 2024
- Penalty
- Initial $16,131 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): Inspection, maintenance, and repair. The employer must ensure: Walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition; a) On or about June 5, 2024, the employer did not ensure the floor of the Cummins area was inspected and maintained in safe condition in that the air hoses for the nail guns dragged on the floor, exposing employees to trip and fall hazards and puncture wound hazards from the nail guns.
Recent events (2)
- — I (S) $0
- — Z (S) $16131
1910.22 D02
- Issued
- Jul 3, 2024
- Abate by
- Jul 30, 2024
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.22(d)(2): Inspection, maintenance, and repair. The employer must ensure: Hazardous conditions on walking-working surfaces are corrected or repaired before an employee uses the walking-working surface again. If the correction or repair cannot be made immediately, the hazard must be guarded to prevent employees from using the walking-working surface until the hazard is corrected or repaired; a) On or about June 12, 2024, the employer did not ensure the trip hazard in the Cummins area created by the nail gun hoses that had resulted in an injury on June 5, 2024, had been corrected before allowing employees to work in the area again.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at FCA, LLC
View FCA, LLC's full OSHA safety record →
More inspections in this industry (NAICS 321920)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347544934.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.