Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: AWP, INC.

Referral inspection · Safety discipline

On , OSHA opened a referral safety inspection of AWP, INC. in W SHELLY DRIVE/ DARLEY ROAD, CLAYMONT, DE 19703 (NAICS 561990). OSHA activity number 347773533.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch AWP, INC. for free Get an email when a new federal OSHA severe-injury report for AWP, INC. is published. One employer, no account, unsubscribe in one click.
Establishment
AWP, INC.
Site address
W SHELLY DRIVE/ DARLEY ROAD
City
CLAYMONT
State
DE
ZIP
19703
Mailing
403 MECO DRIVE, WILMINGTON, DE 19804
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Last modified
Data loaded
NAICS code
561990
Employees
31
Ownership type
Private (A)

3 citations on file for this inspection.

1926.200 G01

Repeat Gravity 10 1 instance 3 exposed
Issued
Feb 25, 2025
Penalty
Initial $91,025 · Current $91,025
29 CFR 1926.200(g)(1): Construction areas were not posted with legible traffic signs at points of hazards:    a) W. Shelley Dr./Darley Rd., Claymont, DE 19703 (eastbound): On or about September 24, 2024, the employer failed to provide flagger ahead signs visible to the public while traveling eastbound on Darley Road to assist traffic in understanding traffic pattern changes at the point of hazard due to utility construction and flagging operations as stated in the MUTCD Section 6C.04 This exposed employees to multiple hazards onsite including but not limited to struck by/ caught in hazards when they performed flagging operations.  The AWP, Inc. dba Area Wide Protective was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.200(g)(1) which was contained in OSHA inspection number 1736165, citation number 1, item number 3 and was affirmed as a final order on 6-3-2024, with respect to a workplace located at 5619 Wilson Mills Rd. Highland Heights, Ohio 44143.
Recent events (2)
  • · C (R) $91025
  • · Z (R) $91025

1926.200 G02

Repeat Gravity 10 3 instances 3 exposed
Issued
Feb 25, 2025
Penalty
Initial $0 · Current $0
29 CFR 1926.200(g)(2): Traffic control signs or devices used for protection of construction workers did not conform to Part VI of the Manual on Uniform Traffic Control Devices for Streets and Highways, 2009 Edition, December 2009 (including Revision 1 dated May 2012 and Revision 2 dated May 2012) - see 1926.6:   a) W. Shelley Dr./Darley Rd., Claymont, DE 19703: On or about September 24, 2024, employees were exposed to multiple hazards onsite including but not limited to struck by/ caught in hazards when they performed flagging operations activities. Road signage used did not conform to provide protection for the equipment and employees. Company vehicles and employees were observed exposed when the road signage was not positioned as required by the MUTCD Section 6F.17.  b) a) W. Shelley Dr./Darley Rd., Claymont, DE 19703: On or about September 24, 2024, employees were exposed to multiple hazards onsite including but not limited to struck by/ caught in hazards when they performed flagging operations activities. Road signage used did not conform to provide protection for the equipment and employees. Company vehicles and employees were observed exposed when the road signage was not posted as required by the MUTCD Section 6F.37.  c) W. Shelley Dr./Darley Rd., Claymont, DE 19703: On or about September 24, 2024, employees were exposed to multiple hazards onsite including but not limited to struck by/ caught in hazards when they performed flagging operations activities. Road signage used did not conform to provide protection for the equipment and employees. Company vehicles and employees were observed exposed when the road signage was not positioned as required by the MUTCD Section 6F.03.  The AWP, Inc. dba AWP Safety was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.200(g)(2), which was contained in OSHA inspection number 1677539, citation number 1, item number 1 and was affirmed as a final order on 1/18/2024, with respect to a workplace located at 15707 N. Expressway 281 Edinburg, Tx 78541.  The AWP, Inc. dba Area Wide Protective was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.200(g)(2) which was contained in OSHA inspection number 1736165, citation number 2, item number 1 and was affirmed as a final order on 6-3-2024, with respect to a workplace located at 5619 Wilson Mills Rd. Highland Heights, Ohio 44143.
Recent events (2)
  • · C (R) $0
  • · Z (R) $0

1926.201 A

Repeat Gravity 10 2 instances 3 exposed
Issued
Feb 25, 2025
Penalty
Initial $91,025 · Current $91,025
29 CFR 1926.201(a): Signaling by flaggers and the use of flaggers, including warning garments worn by flaggers did not conform to Part VI of the Manual on Uniform Traffic Control Devices, 2009 Edition including revision one dated May 2012 and revision 2 dated May 2012:  a) W. Shelley Dr./Darley Rd., Claymont, DE 19703: On or about September 24, 2024, employees were exposed to struck by hazards when they worked in live lanes of traffic and stopped vehicular traffic using hand signals alone, employees were not using the required slow/stop paddle as required in the MUTCD 2009 edition 6E .07.  b) W. Shelley Dr./Darley Rd., Claymont, DE 19703: On or about September 24, 2024, employees were exposed to struck by hazards when they stood in active roadways with her back turned to traffic and failed to follow flagger procedures in section 6E .07 of the 2009 Edition of the MUTCD.  The AWP, Inc dba Area Wide Protective was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.201(a), which was contained in OSHA inspection number 1736165, citation number 1, item number 4 and was affirmed as a final order on 6-3-2024, with respect to a workplace located at 5619 Wilson Mills Rd. Highland Heights, Ohio 44143.
Recent events (2)
  • · C (R) $91025
  • · Z (R) $91025

View AWP, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 347773533.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.