Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: DARAN GENERAL CARPENTRY, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of DARAN GENERAL CARPENTRY, LLC in LOT 22 BARRY LANE RIDGE HILL LANDING, MECHANICSBURG, PA 17050 (NAICS 238130). OSHA activity number 347960221.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Daran General Carpentry, LLC — free Get an email when a new federal OSHA severe-injury report for Daran General Carpentry, LLC is published. One employer, no account, unsubscribe in one click.
Site address
LOT 22 BARRY LANE RIDGE HILL LANDING
City
MECHANICSBURG
State
PA
ZIP
17050
Mailing
4619 GARRETT AVENUE, BELTSVILLE, MD 20705
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
10
Ownership type
A

6 citations on file for this inspection.

1926.20 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 7, 2025
Abate by
May 1, 2025
Penalty
Initial $8,276 · Current $8,276
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s)   a. Lot 22 - On or about January 3, 2025, employees engaged in framing work to include using ladders, working from height, and operating saws and nail guns, were doing so without the employer performing routine inspections of the jobsite to evaluate and implement safety measures to ensure the employees had and were using the appropriate methods and safeguards to not be exposed to fall and struck by hazards.   Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
  • — Z (S) $8276

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Apr 7, 2025
Abate by
May 1, 2025
Penalty
Initial $8,276 · Current $8,276
29 CFR 1926.102(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:  a. Lot 22 - On or about January 3, 2025, employees engaged in sheathing work were using pneumatic nail guns without eye protection, employees were exposed to a struck by hazard.    Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
  • — Z (S) $8276

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 7, 2025
Abate by
May 1, 2025
Penalty
Initial $11,585 · Current $11,585
29 CFR  1926.501(b)(13):Each employee engaged in residential construction activities 6 feet (1.8 m)  or more above lower levels was not protected by guardrail systems, safety net systems, personal fall arrest systems, or an alternative fall protection measure under another provision of paragraph 1926.501(b), nor did the employer demonstrate that it is infeasible or creates a greater hazard to use these systems and develop and implement a fall protection plan which meets the requirements of paragraph (k) of section 1926.502:   a. Lot 22 - On or about January 3, 2025, employees were engaged in sheathing work at the peak of a multilevel single-family home without fall protection. The employees were exposed to a fall hazard working on the roof with an 8:12 pitch and an estimated fall from the peak of 30 feet.  b. Lot 22 - On or about January 3, 2025, employees engaged in sheathing work were exposed to fall to the interior from unsheathed areas of the roof and from holes cut into the roof that would result in a fall to the next lower level.   Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
  • — Z (S) $11585

1926.503 A01

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 7, 2025
Abate by
May 1, 2025
Penalty
Initial $11,585 · Current $11,585
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:  a. Lot 22 - On or about January 3, 2025, employees were sheathing the roof of a single-family multi-level home without the use of a means of fall protection and had not been trained on fall hazards or how to mitigate them, exposing employees to fall hazards of greater than 15 feet.   Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
  • — Z (S) $11585

1926.1053 B01

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 7, 2025
Abate by
May 1, 2025
Penalty
Initial $11,585 · Current $11,585
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface, the ladder did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:   a. Lot 22 - On or about January 3, 2025, employees were accessing the roof utilized an aluminum extension ladder that was not three feet above the landing, employees transitioning between the ladder and the roof were exposed to a fall hazard of greater than 15 feet.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
  • — Z (S) $11585

1926.1053 B06

Serious Gravity 10 1 instance 2 exposed
Issued
Apr 7, 2025
Abate by
May 1, 2025
Penalty
Initial $11,585 · Current $11,585
29 CFR 1926.1053(b)(6): Ladders were used on surfaces which were not stable and level:  a. Lot 22 - On or about January 3, 2025, employees were exposed to a fall hazard of greater than 15 feet while accessing the roof utilized an aluminum extension ladder that was not on level ground and was leaning to the right.   Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
  • — Z (S) $11585

View Daran General Carpentry, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347960221.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.