COLORADO SPRINGS, CO —
OSHA Inspection: CONCEPTS IN MILLWORK, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CONCEPTS IN MILLWORK, INC. in 1490 TUSKEGEE PLACE, COLORADO SPRINGS, CO 80915 (NAICS 337110). OSHA activity number 347992935.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CONCEPTS IN MILLWORK, INC.
- Site address
- 1490 TUSKEGEE PLACE
- City
- COLORADO SPRINGS
- State
- CO
- ZIP
- 80915
- Mailing
- 1490 TUSKEGEE PLACE, COLORADO SPRINGS, CO 80915
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337110
- Employees
- 50
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 II
- Issued
- Aug 6, 2025
- Abate by
- Sep 11, 2025
- Penalty
- Initial $8,276 · Current $6,000 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii):Procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, 29 CFR 1910.147(c)(4)(ii)(A), (c)(4)(ii)(B), (c)(4)(ii)(C) and (c)(4)(ii)(D): a) On or about March 28, 2025, and at times prior the employer did not ensure that the equipment specific procedures for lockout tagout clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy and the means to enforce compliance in that the procedures did not include scope, purpose, authorization, and did not outline the control and release of stored energy including but not limited to electrical charge at input terminals, and thermal energy.
Recent events (2)
- — I (O) $6000
- — Z (S) $8276
1910.147 C06 I
- Issued
- Aug 6, 2025
- Abate by
- Sep 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i):The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed. a) On or about March 28, 2025, and at times prior, the employer did not conduct a periodic inspection of the energy control procedures at least annually to ensure that the procedures and the requirement of this standard were being followed.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.147 C07 I A
- Issued
- Aug 6, 2025
- Abate by
- Sep 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A):Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation. On or about March 28, 2025, and at times prior, the employer did not ensure that authorized employee performing maintenance on equipment received training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and mean neccessary for energy isolation.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D06
- Issued
- Aug 6, 2025
- Abate by
- Sep 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(6):Prior to starting work on machines or equipment that had been locked out or tagged out, the authorized employee did not verify that isolation and deenergization of the machine or equipment had been accomplished. a) On or about March 28, 2025, and at times prior the employer did not ensure that prior to starting work on machines or equipment that had been locked out, that the authorized employee verified the isolation and deenergization of the machine or equipment had been accomplished.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 F03 II
- Issued
- Aug 6, 2025
- Abate by
- Sep 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(f)(3)(ii):Group lockout or tagout devices were not used in accordance with procedures required by 29 CFR 1910.147(c)(4). a) On or about March 28, 2025, and at times prior the employer did not ensure that group lockout or tagout devices were used in accordance with procedures required by 29 CFR 1910.147
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.134 C02 I
- Issued
- Aug 6, 2025
- Abate by
- Sep 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(c)(2)(i):Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible. On or about March 28, 2025, and at times prior the employer did not ensure that voluntary respirator users were provided with the information contained in Appendix D to 29 CFR 1910.134, when voluntary use of N95 disposable masks was permissible by the employer.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.242 B
- Issued
- Aug 6, 2025
- Abate by
- Sep 11, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.242(b): Effective chip guarding and personal protective equipment was not used when compressed air was used for cleaning purposes. a) On or about March 28, 2025, and at times prior the employer did not ensure that compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. when used for cleaning to prevent scratches while drilling for hinges was reduced to less than 30 psi. b) On or about March 28, 2025, and at times prior, the employer did not ensure that compressed air was not used by employees to clean saw dust of themselves or their clothing.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Concepts in Millwork, INC.
View Concepts in Millwork, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 337110)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 347992935.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.