ALVIN, TX —
OSHA Inspection: PHOENIX MILLWORK, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of PHOENIX MILLWORK, INC. in 1901 E. HOUSE ST., ALVIN, TX 77511 (NAICS 321918). OSHA activity number 348019928.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PHOENIX MILLWORK, INC.
- Site address
- 1901 E. HOUSE ST.
- City
- ALVIN
- State
- TX
- ZIP
- 77511
- Mailing
- P.O. BOX 2788, ALVIN, TX 77512
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 80
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.134 C01
- Issued
- Apr 7, 2025
- Abate by
- May 22, 2025
- Penalty
- Initial $6,384 · Current $3,192 Reduced
General-duty citation text
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: a) On or about February 4, 2025, in the solid surface department, the employer did not establish and implement a written respiratory protection program when employees were required to use 3M respirators during sanding and cutting work activities.
Recent events (2)
- — I (S) $3192
- — Z (S) $6384
1910.134 E01
- Issued
- Apr 7, 2025
- Abate by
- May 22, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: a) On or about February 4, 2025, in the solid surface department, employees were not medically evaluated to determine the ability to use respirators before required to use 3M respirators during sanding and cutting work activities.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.134 F02
- Issued
- Apr 7, 2025
- Abate by
- May 22, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employees using tight-fitting facepiece respirators were not fit tested prior to initial use of the respirator: a) On or about February 4, 2025, in the solid surface department, employees were not fit tested before required use of 3M respirators during sanding and cutting work activities.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.141 G02
- Issued
- Apr 7, 2025
- Abate by
- May 1, 2025
- Penalty
- Initial $6,384 · Current $0 Reduced
General-duty citation text
29 CFR 1910.141(g)(2): Employees were permitted to consume food or beverage in area(s) exposed to toxic materials: a) On or about February 4, 2025, in the facility, employees were permitted to consume food in the work areas exposed to toxic chemicals.
Recent events (2)
- — I (S) $0
- — Z (S) $6384
1910.1200 H02 III
- Issued
- Apr 7, 2025
- Abate by
- May 22, 2025
- Penalty
- Initial $6,384 · Current $3,192 Reduced
General-duty citation text
29 CFR 1910.1200(h)(2)(iii): The employer did not provide information to the employees as to the location and availability of the written hazard communication program, and safety data sheets required by 29 CFR 1910.1200: a) On or about February 4, 2025, in the facility, employees were not provided with information as to the location and availability of the written hazard communication program and safety data sheets when performing manufacturing work activities.
Recent events (2)
- — I (S) $3192
- — Z (S) $6384
1904.32 B06
- Issued
- Apr 7, 2025
- Penalty
- Initial $2,128 · Current $1,064 Reduced
General-duty citation text
29 CFR 1904.32(b)(6): An annual summary OSHA 300A Form was not posted by February 1 of the year following the year covered by the records and kept in place until April 30: a) On or about February 4, 2025, in the facility, the employer did not post the annual summary OSHA 300A Form from the previous year.
Recent events (2)
- — I (O) $1064
- — Z (O) $2128
1910.157 G02
- Issued
- Apr 7, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.157(g)(2): The employer did not provide the education required in paragraph (g)(1) of this section upon initial employment and at least annually thereafter: a) On or about February 4, 2025, in the facility, the employer did not provide employees with training on portable fire extinguishers at least annually.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Phoenix Millwork, INC.
View Phoenix Millwork, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348019928.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.