ALVIN, TX —
OSHA Inspection: PHOENIX MILLWORK, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PHOENIX MILLWORK, INC. in 1901 E. HOUSE ST., ALVIN, TX 77511 (NAICS 321918). OSHA activity number 348020025.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PHOENIX MILLWORK, INC.
- Site address
- 1901 E. HOUSE ST.
- City
- ALVIN
- State
- TX
- ZIP
- 77511
- Mailing
- P.O. BOX 2788, ALVIN, TX 77512
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 80
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.147 C04 I
- Issued
- Apr 7, 2025
- Abate by
- May 1, 2025
- Penalty
- Initial $8,511 · Current $4,256 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about February 4, 2025, at the facility, where an employee was conducting maintenance on a Biese edge bander without developing and documenting a specific procedure for the control of hazardous energy. b) On or about February 4, 2025, at the facility, where an employee was conducting maintenance on a Safety Speed Cut Panel Saw without developing and documenting a specific procedure for the control of hazardous energy. c) On or about February 4, 2025, at the facility, where an employee was conducting maintenance on a Striebig Panel Saw without developing and documenting a specific procedure for the control of hazardous energy.
Recent events (2)
- — I (S) $4255.5
- — Z (S) $8511
1910.147 D02
- Issued
- Apr 7, 2025
- Abate by
- May 1, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment: a) On or about February 4, 2025, at the facility, where the pneumatic energy of Biese edge bander was not shut down when employees performed maintenance activities such as, but not limited to, cleaning and greasing the edge bander.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 D04 I
- Issued
- Apr 7, 2025
- Abate by
- May 1, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: a) On or about February 4, 2025, at the facility, where an employee were changing blade for a Safety Speed Cut Panel Saw without affixing a lockout or tagout device to the energy isolating device. b) On or about February 4, 2025, at the facility, where an employee were changing blade for a Striebig Panel Saw without affixing a lockout or tagout device to the energy isolating device.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B02 I
- Issued
- Apr 7, 2025
- Penalty
- Initial $5,426 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose. In completed installations, each outlet box did not have a cover, faceplate, or fixture canopy: a) On or about February 4, 2025, at the cutting department near a construction zone, a junction box on wall was not effectively covered.
Recent events (2)
- — I (S) $0
- — Z (S) $5426
1910.305 G02 III
- Issued
- Apr 7, 2025
- Penalty
- Initial $6,384 · Current $3,192 Reduced
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: a) On or about February 4, 2025, in bay 1 shipping department, where an extension cord connected to a DeWalt radial saw did not have strain relief and the cover was pulled away, exposing the insulated wires.
Recent events (2)
- — I (S) $3192
- — Z (S) $6384
1910.334 A02 I
- Issued
- Apr 7, 2025
- Abate by
- May 1, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket): a) On or about February 4, 2025, in bay 1 shipping department, where an extension cord not having strain relief was not visually inspected before use.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L04 III
- Issued
- Apr 7, 2025
- Penalty
- Initial $1,195 · Current $598 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not conducted at least once every three years: a) On or about February 4, 2025, at the facility, two forklift operators did not receive an evaluation at least once every three years.
Recent events (2)
- — I (O) $597.5
- — Z (O) $1195
More inspections at Phoenix Millwork, INC.
View Phoenix Millwork, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348020025.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.