ROANOKE, IL —
OSHA Inspection: BELLA ELEVATOR, LLC
Follow-up inspection · Safety discipline
At a glance
On , OSHA opened a follow-up safety inspection of BELLA ELEVATOR, LLC in 509 W FRONT ST, ROANOKE, IL 61561 (NAICS 333921). OSHA activity number 348086273.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BELLA ELEVATOR, LLC
- Site address
- 509 W FRONT ST
- City
- ROANOKE
- State
- IL
- ZIP
- 61561
- Mailing
- 10000 N GALENA RD., PEORIA, IL 61615
What kind of inspection was it?
- Inspection type
- Follow-up (F)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333921
- Employees
- 60
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.23 B13
- Issued
- Apr 9, 2025
- Abate by
- May 8, 2025
- Penalty
- Initial $8,511 · Current $5,106 Reduced
General-duty citation text
29 CFR 1910.23(b)(13): The employer did not ensure that no employee carries any object or load that could cause the employee to lose balance and fall while climbing up or down the ladder: On or about March 5, 2025, an employee was exposed to fall hazards up to three feet when climbing a Little Giant Safety Step Ladder, Model 10410BA, while carrying elevator cab roofs and the employer had not ensured employees did not carry loads that could affect balance while climbing a portable ladder.
Recent events (2)
- — I (S) $5106.4
- — Z (S) $8511
1910.212 A01
- Issued
- Apr 9, 2025
- Penalty
- Initial $17,023 · Current $10,214 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about March 5, 2025, employees were exposed to contact with rotating drill bits while operating the drill press and the employer had not ensured machine guard was installed. BELLA ELEVATOR, LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.212(a)(1), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1674852, CITATION NUMBER 1, ITEM NUMBER 3 AND WAS AFFIRMED AS A FINAL ORDER ON NOVEMBER 30, 2023, WITH RESPECT TO A WORKPLACE LOCATED AT 509 W FRONT STREET, ROANOKE, ILLINOIS 61561.
Recent events (2)
- — I (R) $10213.8
- — Z (R) $17023
1910.213 C01
- Issued
- Apr 9, 2025
- Penalty
- Initial $17,023 · Current $10,214 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: On or about March 5, 2025, an employee was exposed to contact with the rotating saw blade when rip sawing dimensional hardwood on the SawStop table saw located in the Cab Shop and the employer had not ensured the blade guard was installed. BELLA ELEVATOR, LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.213(c)(1), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1674852, CITATION NUMBER 1, ITEM NUMBER 4a AND WAS AFFIRMED AS A FINAL ORDER ON NOVEMBER 30, 2023, WITH RESPECT TO A WORKPLACE LOCATED AT 509 W FRONT STREET, ROANOKE, ILLINOIS 61561.
Recent events (2)
- — I (R) $10213.8
- — Z (R) $17023
1910.213 D01
- Issued
- Apr 9, 2025
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: On or about March 5, 2025, an employee was exposed to contact with the rotating saw blade when sawing medium density fiberboard (MDF) on the SawStop table saw located in the Cab Shop and the employer had not ensured the blade guard was installed. BELLA ELEVATOR, LLC WAS PREVIOUSLY CITED FOR A VIOLATION OF THIS OCCUPATIONAL SAFETY AND HEALTH STANDARD OR ITS EQUIVALENT STANDARD 29 CFR 1910.213(d)(1), WHICH WAS CONTAINED IN OSHA INSPECTION NUMBER 1674852, CITATION NUMBER 1, ITEM NUMBER 4c WAS AFFIRMED AS A FINAL ORDER ON NOVEMBER 30, 2023, WITH RESPECT TO A WORKPLACE LOCATED AT 509 W FRONT STREET, ROANOKE, ILLINOIS 61561.
Recent events (2)
- — I (R) $0
- — Z (R) $0
More inspections at Bella Elevator, LLC
View Bella Elevator, LLC's full OSHA safety record →
More inspections in this industry (NAICS 333921)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348086273.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.