OSHA Inspection: MAVIS DISCOUNT TIRE

Issued

Feb 19, 2026

Abate by

Mar 17, 2026

Penalty

Initial $10,214 · Current $10,214

General-duty citation text

29 CFR 1910.28(b)(7): The employer did not ensure that each employee on a walking-working surface near an opening, including one with a chute attached, where the inside bottom edge of the opening is less than 39 inches (99 cm) above that walking-working surface and the outside bottom edge of the opening is 4 feet (1.2 m) or more above a lower level is protected from falling by the use of one of the systems listed in 29 CFR 1910.28(b)(7)(i)-(iv):  a) Mezzanine Tire Chute: On or about September 25, 2025, employees utilizing the tire chute to retrieve tires from the mezzanine were exposed to fall hazards in excess of ten (10) feet from the lower level due to an incomplete guard rail system.  b) Mezzanine Tire Rack: On or about September 25, 2025, employees utilizing the tire rack to retrieve tires from the mezzanine were exposed to fall hazards in excess of ten (10) feet from the lower level due to an incomplete guard rail system.  Abatement certification required.

Issued

Feb 19, 2026

Abate by

Mar 24, 2026

Penalty

Initial $7,660 · Current $7,660

General-duty citation text

29 CFR 1910.133(a)(3): The employer did not ensure that each affected employee who wore prescription lenses while engaged in operations that involved eye hazards wore eye protection that incorporated the prescription in its design, or wore eye protection that could be worn over the prescription lenses without disturbing the proper position of the prescription lenses or the protective lenses:  a) On or about September 25, 2025, an employee who wears prescription lenses did not wear any form of eye protection such as safety glass with the prescription built in or safety glasses that fit over their prescription lenses.   Abatement certification required.

Issued

Feb 19, 2026

Abate by

Mar 3, 2026

Penalty

Initial $7,660 · Current $7,660

General-duty citation text

29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident:  a) Electrical room: On or about September 25, 2025, employees were exposed to shock hazards due to circuit breakers in panel PP1 not being labeled showing its purpose, nor was it located so the that the purpose of the breaker was evident.   Abatement certification required.

Issued

Feb 19, 2026

Abate by

Mar 3, 2026

Penalty

Initial $10,214 · Current $10,214

General-duty citation text

29 CFR 1910.303(g)(2): Except as elsewhere required or permitted by this standard, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures:  a) Break room: On or about September 25, 2025, employees were exposed to shock hazards when using the break room due to live electrical wiring being exposed through the wall.  Abatement certification required.