Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: JONES STONE & MARBLE, INC.

Follow-up inspection · Health discipline

On , OSHA opened a follow-up health inspection of JONES STONE & MARBLE, INC. in 1580 WOODWARD DRIVE EXT, GREENSBURG, PA 15601 (NAICS 327991). OSHA activity number 348623653.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Jones Stone & Marble, INC. — free Get an email when a new federal OSHA severe-injury report for Jones Stone & Marble, INC. is published. One employer, no account, unsubscribe in one click.
Site address
1580 WOODWARD DRIVE EXT
City
GREENSBURG
State
PA
ZIP
15601
Mailing
1580 WOODWARD DRIVE EXT, GREENSBURG, PA 15601
Inspection type
Follow-up (F)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
327991
Employees
12
Ownership type
A

3 citations on file for this inspection.

1910.1053 C

Serious Gravity 5 1 instance 1 exposed
Issued
May 7, 2026
Abate by
Jul 27, 2026
Penalty
Initial $3,547 · Current $1,800 Reduced

Hazardous substances 9000

29 CFR  1910.1053(c): The employer did not ensure that no employee was exposed to an airborne concentration of respirable crystalline silica in excess of 50 ug/m3, calculated as an 8-hour TWA:  a)  At the facility, on or about March 26, 2026 -  Employees were exposed to an airborne concentration of respirable crystalline silica in excess of 50 ug/m3.  An employee designated as a polisher was exposed to crystalline silica at an 8-hour time-weighted average of 89.5 ug/m3.  This is approximately 1.79 times the permissible exposure limit of 50 ug/m3.  An employee was sampled on March 26, 2026 for 360 minutes and zero exposure was assumed for the unsampled portion of the shift.
Recent events (2)
  • — I (S) $1800
  • — Z (S) $3547

1910.1053 E01

Serious Gravity 5 1 instance 1 exposed
Issued
May 7, 2026
Abate by
Jul 27, 2026
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1910.1053(e)(1): The employer did not establish a regulated area wherever an employee's exposure to airborne concentrations of respirable crystalline silica was, or could have been reasonably expected to be, in excess of the PEL:  a)  At the facility on or about March 26, 2026 - A regulated area was not established wherever an employee's exposure to airborne concentrations of respirable silica was in excess of the permissible exposure limit.  An employee designated as a polisher was exposed to crystalline silica at an 8-hour time-weighted average of 89.5 ug/m3.  This is approximately 1.79 times the permissible exposure limit of 50 ug/m3.  An employee was sampled on March 26, 2026 for 360 minutes and zero exposure was assumed for the unsampled portion of the shift.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1053 F01

Serious Gravity 5 1 instance 1 exposed
Issued
May 7, 2026
Abate by
Jul 27, 2026
Penalty
Initial $0 · Current $0

Hazardous substances 9000

29 CFR  1910.1053(f)(1): The employer did not use engineering and work practice controls to reduce and maintain employee exposure to respirable crystalline silica to or below the PEL, unless the employer can demonstrate that such controls are not feasible:  a)  At the facility, on or about March 26, 2026 - Engineering and work practice controls were not used to reduce employee exposure to respirable crystalline silica to or below the PEL.  An employee designated as a polisher was exposed to crystalline silica at an 8-hour time-weighted average of 89.5 ug/m3.  This is approximately 1.79 times the permissible exposure limit of 50 ug/m3.   An employee was sampled on March 26, 2026 for 360 minutes and zero exposure was assumed for the unsampled portion of the shift.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Jones Stone & Marble, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348623653.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.