DUTCH HARBOR, AK —
OSHA Inspection: OCEAN PEACE, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of OCEAN PEACE, INC in F/T SEAFISHER MILE 4, CAPTAINS BAY RD, DUTCH HARBOR, AK 99692 (NAICS 311710). OSHA activity number 348769175.
Where did this inspection happen?
- Establishment
- OCEAN PEACE, INC
- Site address
- F/T SEAFISHER MILE 4, CAPTAINS BAY RD
- City
- DUTCH HARBOR
- State
- AK
- ZIP
- 99692
- Mailing
- 4201 21ST AVE W, SEATTLE, WA 98199
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311710
- Employees
- 53
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A02
- Issued
- Abate by
- Penalty
- Initial $4502.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(2): Guard(s) on machine(s) were not affixed to the machine or secured elsewhere when attachment to the machine was not possible: a) Maintenance Shop: On or about February 25, 2026 employees were exposed to injury because the employers did not secure a protective guards on the Dayton 12" Drill presses (model number: 5PHC5) and the Jet 20" Mill (Model No. J-2223VS SS No. 11010493). OSHA Instruction: Shipyard Employment "Tool Bag" Directive - CPL 02-00-162 allows for the applicability of 29 CFR 1910.215(b)(9) in the ship building and ship repair industry.
Recent events (2)
- — I (S) $0
- — Z (S) $4502
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $4502.00 · Current $2701.00 Reduced
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Ships Maintenance Shop: On or about February 25, 2026 employees performing maintenance activities utilizing the Jet bench Grinder (Model number: JBG-8B, Serial number: 2024010579) were exposed to injury in that the distance between the abrasive wheel and tongue guard exceeded 1/4 inch. OSHA Instruction: Shipyard Employment "Tool Bag" Directive - CPL 02-00-162 allows for the applicability of 29 CFR 1910.215(b)(9) in the ship building and ship repair industry.
Recent events (2)
- — I (O) $2701.2
- — Z (S) $4502
1910.215 D03
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(d)(3): The contact surface(s) of wheel(s), blotter(s) or flange(s) on grinding machine(s) were not flat and free or foreign matter: a) F/T Seafisher - Ships Maintenance Shop: On or about February 25, 2026 employees were exposed to injury while using the Jet Bench Grinder (Model number: JBG-8B, Serial number: 2024010579) were exposed to injury because they used it to grind non-ferrous metals. OSHA Instruction: Shipyard Employment "Tool Bag" Directive - CPL 02-00-162 allows for the applicability of 29 CFR 1910.215(d)(3) in the ship building and ship repair industry.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.303 G01 I B
- Issued
- Abate by
- Penalty
- Initial $6753.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.303(g)(1)(i)(B): For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the width of the working space in front of electrical equipment was less than the width of the equipment or 762 mm (30 inches), whichever was greater : a) Ship's Middeck - On or about February 25, 2025, and at times prior thereto, the employer allowed for the stacking of several boxed in front of an electrical panel, exposing employees to injury, fire and a delay of emergency personal gaining access during an emergency.
Recent events (2)
- — I (S) $0
- — Z (S) $6753
1910.305 B02 I
- Issued
- Abate by
- Penalty
- Initial $4502.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Pull boxes, junction boxes, and fittings were not provided with covers approved for the purpose: a) Ship's Maintenance Shop - On or about February 25, 2026, the employer neglected to cover a junction box, exposing live conductors, exposing employees to significant injuries
Recent events (2)
- — I (S) $0
- — Z (S) $4502
More inspections at OCEAN PEACE, INC
DUTCH HARBOR, AK—2026-02-25 00:00:00
OCEAN PEACE, INC
DUTCH HARBOR, AK—2018-02-09 00:00:00
OCEAN PEACE, INC
DUTCH HARBOR, AK—2018-02-09 00:00:00
OCEAN PEACE, INC
DUTCH HARBOR, AK—2013-02-16 00:00:00
OCEAN PEACE, INC
DUTCH HARBOR, AK—2013-02-16 00:00:00
OCEAN PEACE, INC
View OCEAN PEACE, INC's full OSHA safety record →
More inspections in this industry (NAICS 311710)
MARION JUNCTION, AL—2026-07-13 00:00:00
ALABAMA CATFISH, LLC
UNALASKA, AK—2026-07-07 00:00:00
UNISEA INC
SAN FRANCISCO, CA—2026-06-19 00:00:00
ALL SEAS WHOLESALE, INC
CARROLLTON, GA—2026-06-09 00:00:00
TRIDENT SEAFOODS CORPORATION
WILMINGTON, CA—2026-04-13 00:00:00
J DELUCA FISH COMPANY INC
More inspections in AK
ANCHORAGE, AK—2026-07-10 00:00:00
AK, INC
ANCHORAGE, AK—2026-07-08 00:00:00
ONE STOP SERVICES
ANCHORAGE, AK—2026-07-08 00:00:00
ANGUS ENTERPRISES
ANCHORAGE, AK—2026-07-08 00:00:00
NORTHERN EXCAVATION & CONSTRUCTION, LLC
UNALASKA, AK—2026-07-07 00:00:00
UNISEA INC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348769175.