Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PAPPAS COMPANY, LTD.

Discrimination inspection · Safety discipline

On , OSHA opened a discrimination safety inspection of PAPPAS COMPANY, LTD. in 620 WASHINGTON AVE., WILMETTE, IL 60091 (NAICS 237110). OSHA activity number 348843756.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Pappas Company, LTD. — free Get an email when a new federal OSHA severe-injury report for Pappas Company, LTD. is published. One employer, no account, unsubscribe in one click.
Site address
620 WASHINGTON AVE.
City
WILMETTE
State
IL
ZIP
60091
Mailing
2100 JOHNS CT., GLENVIEW, IL 60025
Inspection type
Discrimination (N)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Last modified
Data loaded
NAICS code
237110
Employees
45
Ownership type
A

4 citations on file for this inspection.

1926.651 D

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 23, 2026
Penalty
Initial $5,958 · Current $3,500 Reduced
29 CFR  1926.651(d): Employees exposed to public vehicular traffic were not wearing warning vests provided by the employer:  a) On March 30, 2026, at the above addressed jobsite, all employees exposed to public vehicular traffic in an active roadway were not wearing high visibility clothing or high visibility vests that were provided by the employer.   No abatement certification or documentation is required for this item.
Recent events (2)
  • — I (S) $3500
  • — Z (S) $5958

1926.652 D02

Serious Gravity 5 2 instances 1 exposed
Issued
Apr 23, 2026
Abate by
May 19, 2026
Penalty
Initial $9,931 · Current $5,000 Reduced
29 CFR  1926.652(d)(2): Manufactured materials and equipment used for protective systems were not used and maintained in a manner that would have prevented employee exposure to hazards:  a) On or about March 26, 2026, at the above addressed jobsite, the employer did not ensure that shields, such as the Allen Trench Safety Corp. Badger Pro Boxes, were used in a manner consistent with the recommendations of the manufacturer.  The box was used with end panels made of fin board with adjustable spreaders, which is not allowable per the manufacturer's tabulated data.     b) On March 30, 2026, at the above addressed jobsite, the employer did not ensure that shields, such as the Allen Trench Safety Corp. Badger Pro Boxes, were used in a manner consistent with the recommendations of the manufacturer.  The bottom trench shield was used with only three of the four spreaders installed.    In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (S) $5000
  • — Z (S) $9931

1926.652 A01

Repeat Gravity 5 1 instance 1 exposed
Issued
Apr 23, 2026
Penalty
Initial $49,657 · Current $29,000 Reduced
29 CFR  1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system designed in accordance with 29 CFR 1926.652 (b) or (c).  a) On March 30, 2026, at the above addressed jobsite, an employee was exposed to cave-in hazards while performing work in a trench with two unprotected walls, that was approximately 10 feet deep.  The employer did not ensure that employees were protected from cave-in hazards while in the excavation.  Pappas Company, LTD. was previously cited for a violation of this occupational safety and health standard 29CFR 1926.652(a)(1), which was contained in OSHA inspection number 1587694, citation number 1, item number 1 and was affirmed as a final order on September 28, 2022, with respect to a workplace located at 2120 St. Johns Avenue in Highland Park, Illinois.  Pappas Company, LTD. was previously cited for a violation of this occupational safety and health standard 29CFR 1926.652(a)(1), which was contained in OSHA inspection number 1710461, citation number 2, item number 1 and was affirmed as a final order on April 29, 2024, with respect to a workplace located at 205 Chestnut Street in Winnetka, Illinois.  Pappas Company, LTD. was previously cited for a violation of this occupational safety and health standard 29CFR 1926.652(a)(1), which was contained in OSHA inspection number 1778419, citation number 2, item number 1a and was affirmed as a final order on March 27, 2025, with respect to a workplace located at 464 Elm Street in Deerfield, Illinois.  No abatement certification or documentation is required for this item.
Recent events (2)
  • — I (R) $29000
  • — Z (R) $49657

1926.652 C03 III

Repeat 1 instance 1 exposed
Issued
Apr 23, 2026
Abate by
May 19, 2026
Penalty
Initial $4,964 · Current $2,500 Reduced
29 CFR  1926.652(c)(3)(iii): At least one copy of the tabulated data, which identifies the registered professional engineer who approved the data, was not maintained at the jobsite during construction of the protective system and thereafter until the protective system was no longer utilized:  a) On March 30, 2026, at the above addressed jobsite, the employer did not maintain a copy of the tabulated data for the two Allen Trench Safety Corp. stacked Badger Pro Boxes trench shields that were used at the site.  Pappas Company, LTD. was previously cited for a violation of this occupational safety and health standard 1926.652(c)(3)(iii), which was contained in OSHA inspection number 1778419, citation number 2, item number 3 and was affirmed as a final order on March 27, 2025, with respect to a workplace located at 464 Elm Street in Deerfield, Illinois.  Pappas Company, LTD. was previously cited for a violation of this occupational safety and health standard 1926.652(c)(3)(iii), which was contained in OSHA inspection number 1710461, citation number 3, item number 1 and was affirmed as a final order on April 29, 2024, with respect to a workplace located at 205 Chestnut Street in Winnetka, Illinois.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
  • — I (R) $2500
  • — Z (R) $4964

View Pappas Company, LTD.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 348843756.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.