BOISE, ID —
OSHA Inspection: COMMITTED FRAMING, INC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of COMMITTED FRAMING, INC in ORCHARD & TARGEE, BOISE, ID 83709 (NAICS 238130). OSHA activity number 313349896.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COMMITTED FRAMING, INC
- Site address
- ORCHARD & TARGEE
- City
- BOISE
- State
- ID
- ZIP
- 83709
- Mailing
- 608 18TH AVENUE SOUTH, NAMPA, ID 83651
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- N
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- SIC code (legacy)
- 1751
- Employees
- 7
- Ownership type
- A
Citations
6 citations on file for this inspection.
5(a)(1)
- Issued
- Oct 8, 2009
- Abate by
- Oct 15, 2009
- Penalty
- Initial $750 · Current $375 Reduced
General-duty citation text
Section 5(a)(1) of the Occupational Safety and Health Act of 1970: The employer did not furnish employment and a place of employment which were free from recognized hazards that were likely to cause death or serious physical harm to the employees in that employees were exposed to struck by/caught between hazards from roof truss collapse during installation: a)Jobsite: On September 17, 2009 and times prior thereto, approximately 119 trusses, with approximately 30 foot spans were installed without top cord diagonal bracing. b)Jobsite: On September 17, 2009 and times prior thereto, approximately 119, 30 foot truss spans were installed without sufficient lateral bracing. One diagonal brace was installed from the floor to a single truss in each unit, while a single row of spacers were installed at the peak of each truss. Note 1) Feasible and acceptable methods of abatement to correct this hazard would be to follow either the manufacturer's recommendations on roof truss erection or the BSCI - B1, Summary Sheet - Guide for Handling, Installing and Bracing of Metal Plate Connected Wood Trusses, and BCSI - B2, Truss Installation & Temporary Restraint/Bracing, issued by the Wood Truss Council of America and Truss Plate Institute. Note 2) Abatement certification is required for this item.
Recent events (2)
- — I (S) $375.00
- — Z (S) $750.00
1926.102 A02
- Issued
- Oct 8, 2009
- Abate by
- Oct 15, 2009
- Penalty
- Initial $600 · Current $300 Reduced
Recent events (2)
- — I (S) $300.00
- — Z (S) $600.00
1926.501 B13
- Issued
- Oct 8, 2009
- Abate by
- Oct 15, 2009
- Penalty
- Initial $750 · Current $750
Recent events (2)
- — I (S) $750.00
- — Z (S) $750.00
1926.501 B14
- Issued
- Oct 8, 2009
- Abate by
- Oct 15, 2009
Recent events (2)
- — I (S)
- — Z (S)
1926.503 A02
- Issued
- Oct 8, 2009
- Abate by
- Oct 15, 2009
Recent events (2)
- — I (S)
- — Z (S)
1926.1052 C01 I
- Issued
- Oct 8, 2009
- Abate by
- Oct 15, 2009
- Penalty
- Initial $450 · Current $225 Reduced
Recent events (2)
- — I (S) $225.00
- — Z (S) $450.00
More inspections at Committed Framing, INC
View Committed Framing, INC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 313349896.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.