TRAVIS AFB, CA —
OSHA Inspection: U.S. AIR FORCE 60TH LOGISTICS READINESS SQUADRON
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of U.S. AIR FORCE 60TH LOGISTICS READINESS SQUADRON in 350 HANGAR AVENUE BLDG. 549, TRAVIS AFB, CA 94535 (NAICS 928110). OSHA activity number 331899765.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- U.S. AIR FORCE 60TH LOGISTICS READINESS SQUADRON
- Site address
- 350 HANGAR AVENUE BLDG. 549
- City
- TRAVIS AFB
- State
- CA
- ZIP
- 94535
- Mailing
- 540 AIRLIFT DRIVE BLDG. 381, WING 2-C, TRAVIS AFB, CA 94535
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 928110
- Employees
- 134
- Ownership type
- D
Citations
4 citations on file for this inspection.
1910.37 A04
- Issued
- Jul 30, 2012
- Abate by
- Aug 20, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(a)(4): Safeguard(s) designed to protect employees during an emergency (e.g., sprinkler systems, alarm systems, fire doors, exit lighting), were not in proper working order at all times: Allied Body Machine Shop: On January 23, 2012 and at times prior thereto, two designated exit doors had a broken self-closing mechanism and the exit doors could not easily close.
Recent events (1)
- — Z (S) $0
1910.107 G05
- Issued
- Jul 30, 2012
- Abate by
- Sep 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(g)(5): The cleaning solvents used to clean spray gun nozzles and auxiliary equipment did not have an equivalent or higher flash point than the solvent/paint used in the normal spraying operation: Allied Body/Machine Shop: On January 23, 2012 and at times prior thereto, the PC5 Economy Lacquer Thinner was used to clean spray equipment assemblies and had a lower flash point then of the coating and paint itself which were normally sprayed onto vehicle parts.
Recent events (1)
- — Z (S) $0
1910.178 A04
- Issued
- Jul 30, 2012
- Abate by
- Sep 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation were performed by the customer or user without manufacturers prior written approval: Bldg. 549: On January 24, 2012 and at times prior thereto, where six foot and rod extensions for the Hyster 60 forklift were used, the compromised lifting capacity was not marked anywhere on the forklift.
Recent events (1)
- — Z (S) $0
1910.178 A05
- Issued
- Jul 30, 2012
- Abate by
- Sep 11, 2012
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(5): Where powered industrial trucks were equipped with front-end attachments other than factory installed attachments, the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with the load capacity centered: Bldg. 549: On January 24, 2012 and at times prior thereto, where six foot and rod extensions for the Hyster 60 forklift were used, the compromised lifting capacity was not marked anywhere on the forklift.
Recent events (1)
- — Z (S) $0
More inspections at U.S. AIR Force 60TH Logistics Readiness Squadron
View U.S. AIR Force 60TH Logistics Readiness Squadron's full OSHA safety record →
More inspections in this industry (NAICS 928110)
More inspections in CA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 331899765.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.