CUMMING, GA —
OSHA Inspection: SUNSET CONTRACTORS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of SUNSET CONTRACTORS, INC. in 8230 MAJORS GLEN CT, CUMMING, GA 30041 (NAICS 238130). OSHA activity number 335455994.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUNSET CONTRACTORS, INC.
- Site address
- 8230 MAJORS GLEN CT
- City
- CUMMING
- State
- GA
- ZIP
- 30041
- Mailing
- 3635 BRADFORD WALK TRL., BUFORD, GA 30519
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.501 B13
- Issued
- Aug 24, 2012
- Abate by
- Sep 17, 2012
- Penalty
- Initial $2,400 · Current $1,200 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph (b) On or about July 26, 2012: Employees were exposed to fall hazards while engaged in residential construction activities of the following instances: a) Employee was exposed to fall hazards of approximately 11. 4 while prepping an exterior wall on the second floor, while standing at the edge of the second floor area without use of fall protection means. b) Employees were exposed to fall hazards of approximately 10.3 feet while working on the second floor around an opening in the floor where steps were to be installed.
Recent events (2)
- — I (S) $1200
- — Z (S) $2400
1926.503 A01
- Issued
- Aug 24, 2012
- Abate by
- Jan 31, 2013
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: On or about July 26, 2012: Employer failed to implement and maintain a training program for employee exposed to fall hazards in the following instances: a) Employee was exposed to fall hazards of approximately 11. 4 while prepping an exterior wall on the second floor, while standing at the edge of the second floor area without use of fall protection means. b) Employee were exposed to fall hazards of approximately 10.3 feet while working on the second floor around an opening in the floor where steps were to be installed.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1926.1053 B01
- Issued
- Aug 24, 2012
- Abate by
- Sep 17, 2012
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: On or about July 26, 2012: Employee were exposed to fall hazards of approximately 10.3 feet while trying to access second floor area, by using a multi-purpose ladder in where the rails of the ladder did not extend above the upper landing surface at least three feet.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1926.1060 A
- Issued
- Aug 24, 2012
- Abate by
- Jan 31, 2013
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards. On or about July 26, 2012: The employer failed to implement and train employee using ladders in the following situation: Employee was exposed to fall hazards of approximately 10.3 feet while using a ladder to access the second floor, where the ladder did not extend at least three feet above the upper landing.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
More inspections at Sunset Contractors, INC.
View Sunset Contractors, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 335455994.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.