BROCKTON, MA —
OSHA Inspection: MONTELLO HEEL MANUFACTURING INCORPORATED
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MONTELLO HEEL MANUFACTURING INCORPORATED in 13 EMERSON AVENUE, BROCKTON, MA 02303 (NAICS 316211). OSHA activity number 337570014.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MONTELLO HEEL MANUFACTURING INCORPORATED
- Site address
- 13 EMERSON AVENUE
- City
- BROCKTON
- State
- MA
- ZIP
- 02303
- Mailing
- 13 EMERSON AVENUE, BROCKTON, MA 02303
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 316211
- Employees
- 31
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.22 A01
- Issued
- Apr 25, 2013
- Abate by
- Jun 12, 2013
- Penalty
- Initial $2,100 · Current $1,470 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition: Worksite: Dust and debris around machinery create tripping hazards and a fire hazard.
Recent events (2)
- — I (S) $1470
- — Z (S) $2100
1910.212 A01
- Issued
- Apr 25, 2013
- Abate by
- Jun 12, 2013
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: First Floor: 1) Cam and gear pinchpoints of the gouging machine were not adequately guarded. 2) A rotating wheel of the rand machine was not guarded. 3) Chain conveyor pinchpoints of the antisqueak machine were not guarded. Second Floor: The rotating stripper of the wedge stripper machine was not guarded.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
1910.219 D01
- Issued
- Apr 25, 2013
- Abate by
- Jun 12, 2013
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): First Floor 1) The pulley and belt guards of the two slugging machines were not guarded. 2) The pulley and belt guard of the gouging machine was not guarded. 3) Pulley and belt drives at the back side of the heel building operations were not guarded. 4) A pulley and belt drive at the back side of the antisqueak machine was not guarded. Second Floor: 1) The pulley and belt drive of the urethane cement machine was not guarded. 2) The pulley and belt drive of the neoprene cement machine was not guarded. 3) The pulley and belt drive of the wedge stripping machine was not enclosed by a guard.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
More inspections at Montello Heel Manufacturing Incorporated
View Montello Heel Manufacturing Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 316211)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 337570014.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.