TRENTON, ND —
OSHA Inspection: NOMAC DRILLING, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of NOMAC DRILLING, LLC in WELL TML 14-13 #1H RIG #323, TRENTON, ND 58853 (NAICS 213111). OSHA activity number 338989031.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- NOMAC DRILLING, LLC
- Site address
- WELL TML 14-13 #1H RIG #323
- City
- TRENTON
- State
- ND
- ZIP
- 58853
- Mailing
- 196 HIGHWAY 22 NORTH, KILLDEER, ND 58640
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 213111
- Employees
- 23
- Ownership type
- A
Citations
3 citations on file for this inspection.
5(a)(1)
- Issued
- Apr 19, 2013
- Abate by
- Apr 29, 2013
- Penalty
- Initial $7,000 · Current $7,000
General-duty citation text
Section 5(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to fall hazards: (a) On or about April 2, 2013, and at times prior thereto, employees were exposed to fall and/or fire hazards while working on the derrick board. The auxiliary escape line did not have the carriage/buggy attached to the cable so as to facilitate a fast means of escape in the event of a fire or other emergency. Nomac Drilling Rig #323 location is Well TML 14-13 #1H near Trenton, ND. (b) On or about April 2, 2013, and at times prior thereto, employees were exposed to fall and/or fire hazards while working on the derrick board. The auxiliary escape line was secured to a hose reel at the ground level and no one on site knew if the hose reel would hold a 3,000 pound pull weight. Nomac Drilling Rig #323 location is Well TML 14-13 #1H near Trenton, ND. Abatement Note: Among other methods, one feasible and acceptable method of abatement to correct this hazard includes but is not limited to following the manufacturer's installation instructions and the API RP 54-1995 Occupational Safety for Oil and Gas Drilling, section 6.10.1, to ensure that the carriage/buggy is attached to provide a ready and convenient way to escape and that the ground anchor will withstand a 3,000-pound pull.
Recent events (3)
- — F (S) $7000
- — C (S) $7000
- — Z (S) $7000
1910.151 C
- Issued
- Apr 19, 2013
- Abate by
- May 2, 2013
- Penalty
- Initial $3,300 · Current $7,000
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: (a) On or about April 2, 2013, and at times prior thereto, employees were working on the second floor of the mud house mixing chemicals and were exposed to corrosive material (calcium hydroxide "lime") without having a usable eyewash in the area. Nomac Drilling Rig #323 location is Well TML 14-13 #1H near Trenton, ND.
Recent events (3)
- — F (S) $7000
- — C (S) $3300
- — Z (S) $3300
1910.23 C01
- Issued
- Apr 19, 2013
- Abate by
- May 2, 2013
- Penalty
- Initial $55,000 · Current $7,000 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: (a) On or about April 2, 2013, and at times prior thereto, employees were working on the second floor of the mud house mixing chemicals and were exposed to a fall hazard of approximately 9 feet to the ground below. Nomac Drilling Rig #323 location is Well TML 14-13 #1H near Trenton, ND. Note: This company was previously cited for violations of this Occupational Safety and Health standard or its equivalent standard which were contained in OSHA Inspection Number 314933656, Citation 01, Item 001, and affirmed as a final order on October 25, 2011, with respect to a workplace located at Drilling Rig #11 in Cordell, OK; OSHA Inspection Number 314159534, Citation 01, Item 001, and affirmed as a final order on February 19, 2011, with respect to a workplace located at Drilling Rig #33 in Wyalusing, PA; and OSHA Inspection Number 314154840, Citation 01, Item 001, and affirmed as a final order on September 17, 2010, with respect to a workplace located at Drilling Rig #14 in Towanda Township, PA.
Recent events (3)
- — F (S) $7000
- — C (R) $55000
- — Z (R) $55000
More inspections at Nomac Drilling, LLC
View Nomac Drilling, LLC's full OSHA safety record →
More inspections in this industry (NAICS 213111)
More inspections in ND
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 338989031.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.